Enabling Ports Within a LAG

Complete the following steps to enable an individual port within a LAG.

Create a LAG.
You can configure any of the following LAG types: static LAG, dynamic LAG, or keep-alive LAG.
```
device(config)# lag blue dynamic id 1
```

Add ports to the LAG.

device(config-lag-blue)# ports ethernet 1/3/1 ethernet 1/3/2

Enable an individual port within a LAG.

device(config-lag-blue)# enable ethernet 1/3/1

To enable a port belonging to a keep-alive LAG, you must enable it from the interface level.

device(config-lag-test)# interface ethernet 1/7/8
device(config-if-e1000-1/7/8)# enable
device(config-if-e1000-1/7/8)#