slot 2 uplink-100g

Sets the module 2 to 100-Gbps uplink mode.
Syntax
slot 2 uplink-100g
no slot 2 uplink-100g
Modes

Global configuration mode

Usage Guidelines

Configure the slot 2 uplink-100g command to set module 2 uplink-100-Gbps mode on ICX 7550-24ZP, ICX 7550-48ZP, ICX 7550-24F, ICX 7550-48F, and ICX 7550-24XZP devices.

Note: The slot 2 uplink-100g command is not allowed if slot 3 has the ICX 7600-2X40GQ 2-port 80-Gbps module present or configured.

When the slot 2 uplink-100g command is configured, the module 3 only supports 4X10G or 1X100G.

The no form of the command changes the slot 2 to default mode after a reload.

Examples

The following example configures module 2 in uplink-100g mode.

ICX7550-48F Router# configure terminal
ICX7550-48F Router(config)# slot 2 uplink-100g

Changes require reload to take effect. Please do write memory and then reload or power cycle!!!
Slot 2 will be operating in uplink mode with 100Gbps speed after reload

ICX7550-48F Router(config)# exit
ICX7550-48F Router# write memory
ICX7550-48F Router# reload

The following example shows how to return to default mode.

ICX7550-48F Router(config)# no slot 2 uplink-100g
Changes require reload to take effect. Please do write memory and then reload or power cycle!!!
Slot 2 will be operating in default mode after reload.
History
Release version Command history
08.0.95 This command was introduced.
Parent topic: Commands Si - Z