Search Results: "icx 7550"

Syslog Syslog Syslog Feature ICX 7150 ICX 7250 ICX 7450 ICX 7550 ICX 7650 ICX 7850 Syslog messages (RFC 3164) 08.0.60 08.0.30 08.0.20 08.0.95 08.0.70 08.0.90 Enhanced Syslog headers specific to RFC 5424 08.0.60 08.0.40 08.0.40 08.0.95 08.0.70 08.0.90 Real-time display of Syslog messages 08.0.60

RIOT is supported for RUCKUS ICX 7550 and ICX 7850 devices only. After enabling VXLAN RIOT, you must use the write memory and reload commands for the changes to take effect. By default, the partition size for the overlay egress interface table is set to 2000 entries when VXLAN RIOT is enabled. The

number of IGMP snooping cache entries is supported. num Specifies the maximum number of IGMP snooping mcache entries supported. The value ranges from 256 through 8192. The default maximum number of IGMP snooping mcache entries is 512. Global configuration mode For ICX 8100, ICX 8200, ICX 7850, and ICX

, and ICX 7550 devices, values are used from the forwarding profile and there is no option to change these values. When a new profile is selected, the values from the new profile are applied. Refer to the forwarding-profile command for more information. The following MLD snooping multicast cache

enhancements that can be configured on ICX 7550 switches to allow brief or no power downtime. When configured, the PDs will not lose power while reloading and will have a brief power-down time when power-cycled. Configure the inline power poe-ha command before connecting the PD. If the ports are configured

number of IGMP snooping cache entries is supported. num Specifies the maximum number of IGMP snooping mcache entries supported. The value ranges from 256 through 8192. The default maximum number of IGMP snooping mcache entries is 512. Global configuration mode For ICX 7850 and ICX 7550 devices, values

mcache entries is supported. num Specifies the maximum number of MLD snooping mcache entries supported. The value ranges from 256 through 8192. The default maximum number of MLD snooping mcache entries is 512. Global configuration mode For ICX 7850 and ICX 7550 devices, values are used from the

platforms for both Layer 2 and Layer 3 software images: RUCKUS ICX 7150 RUCKUS ICX 7250 RUCKUS ICX 7450 RUCKUS ICX 7550 RUCKUS ICX 7650 RUCKUS ICX 7750 RUCKUS ICX 7850 For the DHCPv6 server to be enabled, you must upgrade to FI 08.0.90 using the Unified FastIron Image (UFI). Refer to the Software Upgrade and Downgrade chapter in the RUCKUS FastIron Software Upgrade Guide for more information.

oif-list and all keywords. device(config)# no ip multicast optimization oif-list all device(config)# no ipv6 multicast optimization oif-list all device(config)# write memory device(config)# exit device# reload Entry optimization is enabled by default on RUCKUS ICX 7150, ICX 7250, ICX 7450, ICX 7550, ICX 7650, ICX 7750, and ICX 7850 devices for Layer 2 and Layer 3 multicast traffic.

, and ICX 7550 devices do not support PFC. PFC must be enabled on at least one PG before you can use this command to configure an interface. Enter global configuration mode. device# configure terminal Enable interface configuration mode. device(config)# interface ethernet 1/1/1 Enable PFC on the