Search Results: "icx 7850"

platforms for both Layer 2 and Layer 3 software images: RUCKUS ICX 7150 RUCKUS ICX 7250 RUCKUS ICX 7450 RUCKUS ICX 7550 RUCKUS ICX 7650 RUCKUS ICX 7850 For the DHCPv6 server to be enabled, you must upgrade to FI 08.0.90 using the Unified FastIron Image (UFI). Refer to the Software Upgrade and Downgrade chapter in the RUCKUS FastIron Software Upgrade Guide for more information.

entries supported is 512 by efault. num Specifies the maximum number of MLD snooping mcache entries supported. For ICX 7650 devices, valid values range from 256 through 8000. For ICX 7150 devices, valid values range from 256 through 1024. Global configuration mode For ICX 8200, ICX 8100, ICX 7850, and

number of IGMP snooping cache entries is supported. num Specifies the maximum number of IGMP snooping mcache entries supported. The value ranges from 256 through 8192. The default maximum number of IGMP snooping mcache entries is 512. Global configuration mode For ICX 8100, ICX 8200, ICX 7850, and ICX

RIOT is supported for RUCKUS ICX 7550 and ICX 7850 devices only. After enabling VXLAN RIOT, you must use the write memory and reload commands for the changes to take effect. By default, the partition size for the overlay egress interface table is set to 2000 entries when VXLAN RIOT is enabled. The

number of IGMP snooping cache entries is supported. num Specifies the maximum number of IGMP snooping mcache entries supported. The value ranges from 256 through 8192. The default maximum number of IGMP snooping mcache entries is 512. Global configuration mode For ICX 7850 and ICX 7550 devices, values

mcache entries is supported. num Specifies the maximum number of MLD snooping mcache entries supported. The value ranges from 256 through 8192. The default maximum number of MLD snooping mcache entries is 512. Global configuration mode For ICX 7850 and ICX 7550 devices, values are used from the

platforms for both Layer 2 and Layer 3 software images: RUCKUS ICX 7150 RUCKUS ICX 7250 RUCKUS ICX 7450 RUCKUS ICX 7550 RUCKUS ICX 7650 RUCKUS ICX 7750 RUCKUS ICX 7850 For the DHCPv6 server to be enabled, you must upgrade to FI 08.0.90 using the Unified FastIron Image (UFI). Refer to the Software Upgrade and Downgrade chapter in the RUCKUS FastIron Software Upgrade Guide for more information.

Specifies a stack unit. User EXEC mode This command is supported for Ruckus ICX 7750 and ICX 7850 devices. The following example shows agent-related information for all IPv4 sessions. device> show bfd agent sessions ipv4 all Flags: H:Hop [S:Single/M:Multi] P:Passive-Mode M:Micro-BFD MinTx/MinRx/Mult

Multicast Considerations Unless otherwise stated, Layer 2 and Layer 3 multicast features supported on a standalone ICX 7650, ICX 7750, or ICX 7850 are supported by the CB in a Campus Fabric domain, and the Layer 2 and Layer 3 scaling capacity are the same. An IP address cannot be configured on a PE

Enabling priority flow control on an interface Enabling priority flow control on an interface Enabling priority flow control on an interface Follow these steps to enable PFC on an interface. PFC is supported only on RUCKUS ICX 7250, ICX 7450, and ICX 7750 devices. The ICX 7150, ICX 7650, ICX 7850, and