Search Results: "icx 7850"

+ configurations. This command can be configured in BGP L2VPN EVPN address family configuration mode for RUCKUS ICX 7850 and ICX 7550 devices only. The no form of the command restores the default. The followin example configures the device to reflect routes that are not installed in the RTM. device

IP Cache and Routing Table Scaling IP Cache and Routing Table Scaling IP Cache and Routing Table Scaling ICX 7150 ICX 7150-ES ICX 7550 ICX 7650 ICX 7850 ICX 8100 ICX 8200 Routing Table – IPv4 (Shared by all VRFs) 1,000 1,000 Profile 1: 97,280 Profile 2: 8,192 Profile 3: 21,504 131,072 Profile 1

-based Enables VLAN-based VXLAN. EVPN configuration mode The dependent VLAN-to-VNI mapping has to be configured as part of the VXLAN overlay configuration. This command is supported for RUCKUS ICX 7850 and ICX 7550 devices only. The no form of the command removes a range of Layer 2 EVPN instances

number of IGMP snooping cache entries is supported. num Specifies the maximum number of IGMP snooping mcache entries supported. The value ranges from 256 through 8192. The default maximum number of IGMP snooping mcache entries is 512. Global configuration mode For ICX 7850 and ICX 7550 devices, values

mcache entries is supported. num Specifies the maximum number of MLD snooping mcache entries supported. The value ranges from 256 through 8192. The default maximum number of MLD snooping mcache entries is 512. Global configuration mode For ICX 7850 and ICX 7550 devices, values are used from the

Syslog Syslog Syslog Feature ICX 7150 ICX 7250 ICX 7450 ICX 7550 ICX 7650 ICX 7850 Syslog messages (RFC 3164) 08.0.60 08.0.30 08.0.20 08.0.95 08.0.70 08.0.90 Enhanced Syslog headers specific to RFC 5424 08.0.60 08.0.40 08.0.40 08.0.95 08.0.70 08.0.90 Real-time display of Syslog messages 08.0.60

PoE/PoE+ - Power over Ethernet PoE/PoE+ - Power over Ethernet PoE/PoE+ - Power over Ethernet Feature ICX 7150 ICX 7250 ICX 7450 ICX 7550 ICX 7650 ICX 7850 Auto PoE firmware upgrade 08.0.70 08.0.70 08.0.70 08.0.95 08.0.70 No PoE enabled by default 08.0.70 08.0.70 08.0.70 08.0.95 08.0.70 No Power

LLDP - Link Layer Discovery Protocol LLDP - Link Layer Discovery Protocol LLDP - Link Layer Discovery Protocol Feature ICX 7150 ICX 7250 ICX 7450 ICX 7550 ICX 7650 ICX 7750 ICX 7850 LLDP 8.0.60 8.0.30 8.0.20 8.0.95 8.0.70 8.0.10 8.0.90 LLDP-MED 8.0.60 8.0.30 8.0.20 8.0.95 8.0.70 8.0.10 8.0.90

Multi-VRF Multi-VRF Multi-VRF For considerations related to Multi-VRF in an 802.1BR (SPX) configuration, refer to the Ruckus FastIron Campus Fabric Configuration Guide Feature ICX 7150 ICX 7250 ICX 7450 ICX 7550 ICX 7650 ICX 7750 ICX 7850 Multi-VRF IPv4 forwarding No 8.0.50 8.0.20 8.0.95 8.0.70

Guide Feature ICX 7150 ICX 7250 ICX 7450 ICX 7550 ICX 7650 ICX 7750 ICX 7850 Diagnostic error codes 8.0.60 8.0.30 8.0.20 8.0.95 8.0.70 8.0.10 8.0.90 IPv4 and IPv6 ping 8.0.60 8.0.30 8.0.20 8.0.95 8.0.70 8.0.10 8.0.90 IPv4 traceroute 8.0.60 8.0.30 8.0.20 8.0.95 8.0.70 8.0.10 8.0.90 RAS Histogram