-
sflow sample
Last Updated
Sep 03, 2026
resources. Using a low denominator for the sampling rate can cause high CPU utilization. On RUCKUS ICX 7750, ICX 7450, ICX 7250, ICX 7650, ICX 7850, and ICX 7550 the CPU-bound sFlow sample packets are rate-limited to 50 samples per second to avoid high CPU utilization. On RUCKUS ICX 7450, ICX 7250, ICX 7650
-
Layer 3 Premium Features and Platform Support
Last Updated
Sep 03, 2026
the purchase of the Ruckus ICX 7750 Certificate of Entitlement. OSPFv2 OSPFv3 (IPv6) VRRPv3 (IPv6) VRRP-E GRE PBR PIM-SM, PIM-SSM, PIM-DM PIM Passive BGP, BGP4+ (IPv6) VRF (IPv4 and IPv6) IPv6 over IPv4 Tunnels ICX 7850 Layer 3 Premium Features The Layer 3 Premium license supports the following features on an ICX 7850: OSPFv2 OSPFv3 (IPv6) VRRPv3 (IPv6) VRRP-E GRE PBR PIM-SM, PIM-SSM, PIM-DM PIM Passive BGP, BGP4+ (IPv6) VRF (IPv4 and IPv6)
-
Locating a Device Using Port LEDs
Last Updated
Sep 03, 2026
LED status. The default LED status behavior also applies after the device is rebooted when all port LEDs are turned on using the led on command. The LED ON/OFF feature is supported only on the platforms where LED status mode is available. The status mode is supported on ICX 7550, ICX 7650, ICX 7850, and
-
Locating a Device Using Port LEDs
Last Updated
Sep 03, 2026
as mode button or cable/SFP plugin. The configurable time interval is from 15 seconds to a maximum of 120 seconds. The default time interval is 15 seconds. The blink LED feature is supported on the ICX 7150, ICX 7650, ICX 7850, and ICX 7550 devices. You can use the led blink stack all command from an
-
Last Updated
Sep 03, 2026
12 units configured in a ring or linear topology. The units in a stack are from the same model family; for example, a stack can be an ICX 8200 stack or an ICX 7850 stack, but it cannot combine ICX 8200 and ICX 7850 devices. Stack members can be physically separated or located together. For example
-
Last Updated
Sep 03, 2026
ICX 7250 ICX 7250 PE unit, an ICX 7450 ICX 7450 PE unit, or an ICX 7650 ICX 7650, ICX 7750 ICX 7750, or ICX 7850 ICX 7850 CB unit. Campus Fabric supports port mirroring, VLAN mirroring, and ACL mirroring with a mirror clause. ACL-based Inbound Mirroring ACL-based Inbound Mirroring Creating an ACL
-
ip dns vrf
Last Updated
Sep 03, 2026
supported on ICX8200, ICX 7850, ICX7650, and ICX7550 devices only. The no form of the command removes the IPv4 DNS server configuration with VRF. The following example confugures DNS server resolution over a user-defined VRF. device(config)# ip dns vrf vrf1 server-address 8.8.8.8 device(config)# ip
-
AP LED Behavior
Last Updated
Sep 22, 2026
The network is down. AIR Always off Not used Switch LED Behavior For detailed information on Switch LED behavior, refer to the relevant hardware installation guide: https://docs.commscope.com/bundle?labelkey=icxswitches. ICX 7150 ICX 7550 ICX 7650 ICX 7850 ICX 8200
-
always-propagate
Last Updated
Sep 03, 2026
+ configurations. This command can be configured in BGP L2VPN EVPN address family configuration mode for RUCKUS ICX 7850 and ICX 7550 devices only. The no form of the command restores the default. The followin example configures the device to reflect routes that are not installed in the RTM. device
-
evpn-instance range
Last Updated
Sep 03, 2026
-based Enables VLAN-based VXLAN. EVPN configuration mode The dependent VLAN-to-VNI mapping has to be configured as part of the VXLAN overlay configuration. This command is supported for RUCKUS ICX 7850 and ICX 7550 devices only. The no form of the command removes a range of Layer 2 EVPN instances