Search Results: "icx 7850"

IP Addressing IP Addressing IP Addressing Feature ICX 7150 ICX 7250 ICX 7450 ICX 7550 ICX 7650 ICX 7850 Bandwidth for IP interfaces 08.0.61 08.0.30 08.0.30 08.0.95 08.0.70 08.0.90 Equal Cost Multi-Path (ECMP) load sharing 08.0.61 08.0.30 08.0.20 08.0.95 08.0.70 08.0.90 Virtual Interfaces 08.0.61

IPv6 Multicast Routing IPv6 Multicast Routing IPv6 Multicast Routing Feature ICX 7150 ICX 7250 ICX 7450 ICX 7550 ICX 7650 ICX 7850 IPv6 multicast boundaries 08.0.61 08.0.40 08.0.20 08.0.95 08.0.70 08.0.90 Embedded RPv6 08.0.61 08.0.40 08.0.20 08.0.95 08.0.70 08.0.90 Multi-VRF support No 08.0.50

FastIron Devices and Campus Fabric Communication FastIron Devices and Campus Fabric Communication FastIron Devices and Campus Fabric Communication An ICX 7650, ICX 7750, or ICX 7850 stack or standalone serves as the control bridge (CB) for attached ICX 7450, ICX 7250, or ICX 7150 devices configured

normal traffic to the switch. ip tcp analytics rate threshold-rate no ip tcp analytics rate threshold-rate The default threshold rate is 1000 packets per second. This command is supported on ICX 7550, ICX 7650 and ICX 7850 devices only. threshold-rate The threshold rate at which an alarm or

MAC address for a Virtual Tunnel End Point (VTEP) to the peering VTEPs so that they use the advertised MAC address as the nexthop when required. This command is supported for RUCKUS ICX 7850 and ICX 7550 devices only. The no form of the command disables the advertising of MY MAC addresses to all EVPN

RUCKUS ICX 7850 and ICX 7550 devices only. The no form of the command removes L2VPN EVPN address family configurations from the device. The following example enables BGP L2VPN EVPN address family configuration mode. device# configure terminal device(config)# router bgp device(config-bgp-router)# address-family l2vpn evpn device(config-bgp-l2vpn-evpn)# Release version Command history 10.0.20 This command was introduced.

normal traffic to the switch. ip tcp analytics rate threshold-rate no ip tcp analytics rate threshold-rate The default threshold rate is 1000 packets per second. This command is supported on ICX 7550, ICX 7650 and ICX 7850 devices only. threshold-rate The threshold rate at which an alarm or

For ICX 7850 and ICX 7550 devices, values are used from the forwarding profile and there is no option to change these values. When a new profile is selected, the values from the new profile are applied. Refer to the forwarding-profile command for more information. The no form of this command restores

; the default is 1024. Global configuration mode For ICX 7850 and ICX 7550 devices, values are used from the forwarding profile and there is no option to change these values. When a new profile is selected, the values from the new profile are applied. Refer to the forwarding-profile command for more

For ICX 7850 and ICX 7550 devices, values are used from the forwarding profile and there is no option to change these values. When a new profile is selected, the values from the new profile are applied. Refer to the forwarding-profile command for more information. The no form of this command restores