-
Changes to stack-port and stack-trunk Configuration
Last Updated
Sep 03, 2026
comparison of new behavior and old behavior. All examples are based on ICX 7750 ports. General Comparison of the New and Old Behaviors in Configuring Stacking Ports and Trunks The following table provides a side-by-side comparison of stacking port and stacking trunk configuration basics in FastIron
-
RUCKUS SmartZone (ST-GA) Upgrade Guide, 7.0.0
Last Updated
Sep 03, 2026
Following are the supported ICX models: Supported ICX Models Supported ICX Models ICX 7150 ICX 7450 * ICX 7750 ICX 7250 ICX 7650 ICX 7850 ** ICX 7550 ICX 8200 * ICX 7750 is supported through FastIron 08.0.95 release. ** FastIron 08.0.95a or later is required for managing ICX7550 switches. ICX switches
-
RUCKUS SmartZone (LT-GA) Upgrade Guide, 7.1.1
Last Updated
Sep 03, 2026
ZF7363-U ZF7372 ZF7762-S-AC ZF7962 ZF7762 ZF7762-AC ZF7782-S ZF7982 ZF7781CM ZF7782 FZM300 ZF7782-E ZF7762-S ZF7372-E Switch Management Feature Support Matrix Following are the supported ICX models: Supported ICX Models Supported ICX Models ICX 7150 ICX 7450 * ICX 7750 ICX 7250 ICX 7650 ICX 7850
-
RUCKUS SmartZone (LT-GA) Upgrade Guide, 7.1.0
Last Updated
Sep 03, 2026
Following are the supported ICX models: Supported ICX Models Supported ICX Models ICX 7150 ICX 7450 * ICX 7750 ICX 7250 ICX 7650 ICX 7850 ** ICX 7550 ICX 8200 * ICX 7750 is supported through FastIron 08.0.95 release. ** FastIron 08.0.95a or later is required for managing ICX7550 switches. ICX switches must
-
set ip next-hop
Last Updated
Sep 03, 2026
default VRF of the interface is considered. The next hop in a route map will take effect only if the interface on which the route map is applied and the next hop in the route map are in the same VRF The no-ttl-decrement option is supported only on ICX 7750 and ICX 7450 devices. The no form of the
-
show ipv6 multicast mcache
Last Updated
Sep 03, 2026
7650, ICX 7750, and ICX 7850 devices, l2mc is replaced with ipmc in the output. For ICX 7550, ICX 7650, and ICX 7850 devices, l2mc is replaced with ipmc in the output. ref-cnt The number of mcaches using this IPMC. AgeMask Stacking unit ID where traffic flow is active (traffic ingression). HwFailMask
-
qos scheduler-profile
Last Updated
Sep 03, 2026
remove a scheduler-profile you must ensure that it is not attached to any port. On ICX 7450 and ICX 7750 devices, changing the global scheduler and port scheduler on running traffic may cause traffic loss. The default QoS-profile weights for each queue using a weighted QoS mechanism are as follows
-
lldp advertise port-id-subtype
Last Updated
Sep 03, 2026
ethernet 1/2/2), or you can combine a range with a list (for example, ethernet 1/1/1 to ethernet 1/1/4 ethernet 1/1/1 ethernet 1/1/2). Global configuration mode The port ID subtype to advertise is only configurable on ICX 7750, ICX 7450, and ICX 7250 devices. The LLDP port ID subtype advertises
-
set ip next-hop
Last Updated
Sep 03, 2026
default VRF of the interface is considered. The next hop in a route map will take effect only if the interface on which the route map is applied and the next hop in the route map are in the same VRF The no-ttl-decrement option is supported only on ICX 7750 and ICX 7450 devices. The no form of the
-
show ipv6 multicast mcache
Last Updated
Sep 03, 2026
7650, ICX 7750, and ICX 7850 devices, l2mc is replaced with ipmc in the output. For ICX 7550, ICX 7650, and ICX 7850 devices, l2mc is replaced with ipmc in the output. ref-cnt The number of mcaches using this IPMC. AgeMask Stacking unit ID where traffic flow is active (traffic ingression). HwFailMask