Search Results: "icx 7550"

MCT - Multi-Chassis Trunking MCT - Multi-Chassis Trunking MCT - Multi-Chassis Trunking MCT is not supported in stacking mode. The exception is that, from FastIron release 09.0.10a, ICX 7850 standalones and stacks can be configured as MCT cluster peers. Feature ICX 7150 ICX 7250 ICX 7450 ICX 7550 ICX

LAG - Link Aggregation Group LAG - Link Aggregation Group LAG - Link Aggregation Group Feature ICX 7150 ICX 7250 ICX 7450 ICX 7550 ICX 7650 ICX 7850 LAG virtual interface 08.0.61 08.0.61 08.0.61 08.0.95 08.0.70 08.0.90 Dynamic insertion and removal of ports 08.0.60 08.0.30 08.0.20 08.0.95 08.0.70

PIM - Protocol-Independent Multicast PIM - Protocol-Independent Multicast PIM - Protocol-Independent Multicast Feature ICX 7150 ICX 7250 ICX 7450 ICX 7550 ICX 7650 ICX 7850 PIM-SSM 08.0.61 08.0.40 08.0.20 08.0.95 08.0.70 08.0.90 Multi-VRF support No 08.0.50 08.0.20 08.0.95 08.0.70 08.0.90 PIM Dense

VLAN - Virtual LAN VLAN - Virtual LAN VLAN - Virtual LAN Feature ICX 7150 ICX 7250 ICX 7450 ICX 7550 ICX 7650 ICX 7850 VLAN 08.0.60 08.0.30 08.0.20 08.0.95 08.0.70 08.0.90 Port-based VLANs 08.0.60 08.0.30 08.0.20 08.0.95 08.0.70 08.0.90 VLAN groups 08.0.60 08.0.30 08.0.20 08.0.95 08.0.70 08.0.90

show lrm-adapter ethernet show lrm-adapter ethernet show lrm-adapter ethernet Displays the LRM adapter parameters. show lrm-adapter ethernet ~ { stackid/slot/port }~ User EXEC mode The command is available only for ICX 7150 and ICX 7550 10G access ports. The show lrm-adapter ethernet command

127-Bit Subnet Masks on Point-to-Point Networks 127-Bit Subnet Masks on Point-to-Point Networks 127-Bit Subnet Masks on Point-to-Point Networks 127-bit subnet masks are supported on ICX 7150, ICX 7250, ICX 7450, ICX 7550, ICX 7650, ICX 7750, and ICX 7850 devices running the full Layer 3 image. To

link and active LEDs to determine if the network connections are functioning properly. To verify that a RUCKUS ICX 7550 can reach another device through the network, use the ping command at any level of the CLI. For more information, refer to the RUCKUS FastIron Management Configuration Guide.

Enabling Priority Flow Control Globally Enabling Priority Flow Control Globally Enabling Priority Flow Control Globally Follow these steps to enable PFC globally. PFC is supported only on RUCKUS ICX 7250, ICX 7450, and ICX 7750 devices. The ICX 7150, ICX 7650, ICX 7850, and ICX 7550 devices do not

speed only in groups of 4 ports or sets of groups of 4 ports e.g. 1/1/1-1/1/4, 1/1/1-1/1/8. 1G Cu (fixed ports) Y (default) Y ICX 7550-24ZP and ICX 7550-48ZP 1G copper ports does not support 100M half-duplex. ICX 7550-24ZP and ICX 7550-48ZP 1G copper ports does not support 100M half-duplex. Y Y ICX

and subsequent patches 10.0.10f and subsequent patches ICX 7150-C08P, -C08PT 08.0.92 09.0.10a and subsequent patches ICX 7250 08.0.80a 09.0.10a and subsequent patches ICX 7450 08.0.80a 09.0.10a and subsequent patches ICX 7550 08.0.95a - ICX 7550-24XZP 10.0.20b_cd2 - ICX 7650 08.0.80a - ICX 7750