Enabling Priority Flow Control Globally

Follow these steps to enable PFC globally.

Note: PFC is supported only on RUCKUSICX 7250, ICX 7450, and ICX 7750 devices. The ICX 7150, ICX 7650, ICX 7850, and ICX 7550 devices do not support PFC.

  1. Enter global configuration mode. 
    device# configure terminal
  2. Enable PFC globally. 
    device(config)# priority-flow-control enable
  3. Return to privileged EXEC mode. 
    device(config)# exit
  4. Verify the configuration. 
    device# show priority-flow-control
Global PFC Status: Enabled
PFC Disabled on PG0
PFC Disabled on PG1
PFC Enabled on PG2
PFC Disabled on PG3
  5. Save the configuration. 
    device# write memory

Enable Priority Flow Control Globally Configuration Example

device# configure terminal
device(config)# priority-flow-control enable
device(config)# exit
device# show priority-flow-control
device# write memory
Parent topic: Configuring QoS