-
ip route bfd
Last Updated
Sep 03, 2026
recommended to use the default values. This command is supported for Ruckus ICX 7750 and ICX 7850 devices. The no form of the command removes the configured BFD session parameters. The following example configures a BFD session on an IP static route. The default BFD session timer values are applied. device
-
Campus Fabric (SPX) Image Upgrade
Last Updated
Sep 03, 2026
image cannot be stored on an ICX 7650, ICX 7750, or ICX 7850 stack unit. To copy the image of a PE in a Campus Fabric domain, the auto image copy process accesses the correct PE image on a TFTP server. If the correct image is found on the server, it is downloaded to the mismatched unit. Once the
-
show ipv6 multicast mcache
Last Updated
Sep 03, 2026
seconds. The mcache is reset to 0 if traffic continues to arrive, otherwise it is aged out when it reaches the time defined by the ipv6 multicast mcache-age command. uptime The up time of this mcache in seconds. l2mc (or ipmc) The hardware entry which has the list of replication ports. In the ICX
-
Configuration Notes and Feature Limitations for IGMP Snooping and Layer 3 Multicast Routing
Last Updated
Sep 03, 2026
version 2 is recommended; IGMP version 3 is not recommended. Each VLAN can independently enable or disable IGMP, or configure IGMPv2 or IGMPv3. IGMP/PIM-SM snooping over Multi-Chassis Trunking is supported on the following Ruckus ICX devices: ICX 7650 ICX 7750 ICX 7850 IGMP snooping is MAC-based for
-
Layer 2 Multicast in an SPX Configuration
Last Updated
Sep 03, 2026
snooping optimization turned on. Layer 2 Multicast Scaling Numbers with Optimization Turned On System Parameter Scaling Number IGMP Groups 8192 IGMP Mcache 8192 MLD Groups 8192 MLD Mcache 8192 For ICX 7750 devices, the router image supports only 6144 MLD mcache for both IGMP and MLD. The following
-
Bidirectional Forwarding Detection Overview
Last Updated
Sep 03, 2026
hop for the route and updates the RTM accordingly. BFD can be configured for use with the following protocols or applications: OSPFv2 OSPFv3 BGP4 BGP4+ IP static routes BFD is supported for the following RUCKUS ICX platforms: ICX 7750 ICX 7850 Micro-BFD is supported. Micro-BFD sessions are BFD
-
GRE Tunnel Parameters
Last Updated
Sep 03, 2026
device to support up to the maximum number of GRE tunnels as displayed in the following table. Number of GRE Tunnels Supported for ICX Devices Device Maximum Number of GRE Tunnels Default Number of GRE Tunnels ICX 7250 8 8 ICX 7450 64 16 ICX 7550 64 16 ICX 7650 64 16 ICX 7750 64 16 ICX 7850 64 16 You
-
FastIron Stacking Ports and Bandwidth
Last Updated
Sep 03, 2026
stacking or uplink on Module 2 ICX 7750 6 X 40-Gbps front and rear stacking and uplink ICX 7650 4 X 40-Gbps stacking or uplink, or 2 X 100-Gbps stacking or uplink on slot 3 ICX 7550 1 X 100-Gbps or 2 X 40-Gbps stacking or uplink on slot 2 ICX 7450 (rear) 1 X 40-Gbps stacking and uplink on slots 3 and 4
-
RUCKUS SmartZone (LT-GA) Upgrade Guide, 7.2.0
Last Updated
Sep 03, 2026
ZF7982 ZF7781CM ZF7782 FZM300 ZF7782-E ZF7762-S ZF7372-E Switch Management Feature Support Matrix Following are the supported ICX models: Supported ICX Models Supported ICX Models ICX 7150 ICX 7450 * ICX 7750 ICX 7250 ICX 7650 ICX 7850 ** ICX 7550 ICX 8200 * ICX 7750 is supported through FastIron
-
RUCKUS SmartZone (LT-GD) Upgrade Guide, 6.1.2
Last Updated
Sep 03, 2026
ZF7363 ZF7363-U ZF7441 ZF7761-CM ZF7762 ZF7762-AC ZF7762-S ZF7762-S-AC ZF7762-T ZF7962 Switch Management Feature Support Matrix Following are the supported ICX models: Supported ICX Models Supported ICX Models ICX 7150 ICX 7450 * ICX 7750 ICX 7250 ICX 7650 ICX 7850 ** ICX 7550 ICX 8200 * ICX 7750 is