Search Results: "icx 7750"

and Brocade ICX 7750 devices. Name, OID, and syntax Access Description brcdSPXOperUnitTable brcdIp.1.1.3.40.2.2 Not-accessible The 802.1BR SPX operation unit table. brcdSPXOperUnitIndex brcdIp.1.1.3.40.2.2.1.1 Syntax: Integer32 Not-accessible The SPX unit ID. The CB unit ID is from 1 through 16 and

Enabling priority flow control on an interface Enabling priority flow control on an interface Enabling priority flow control on an interface Follow these steps to enable PFC on an interface. PFC is supported only on RUCKUS ICX 7250, ICX 7450, and ICX 7750 devices. The ICX 7150, ICX 7650, ICX 7850

show breakout show breakout show breakout Displays information on 10 Gbps sub-ports broken out from 40 Gbps ports on certain FastIron devices. show breakout Privileged EXEC mode The show breakout command is available only on ICX 7750 devices. The show breakout command displays the following

applicable only on Ruckus ICX 7150, ICX 7450, and ICX 7750,,,, devices. Use the no form of the command to re-enable shutdown based on temperature threshold. The no form of the command disables the battleshort mode at global level and at unit level. Either the global battleshort mode or unit-specific

configuration mode The system-max max-ecmp command is supported only on the Ruckus ICX 7750. If the maximum number of ECMP paths is not configured at the system level, by default, you can configure the maximum number of IP load sharing paths to a value from 2 through 8. The configuration of the maximum

applicable only on Ruckus ICX 7150, ICX 7450, and ICX 7750,,,, devices. Use the no form of the command to re-enable shutdown based on temperature threshold. The no form of the command disables the battleshort mode at global level and at unit level. Either the global battleshort mode or unit-specific

throughout the guide. Unsupported hardware This release and future releases do not support ICX 7750 devices. References have been removed throughout the guide. Updates to address defects Minor updates on content throughout to address defects. All chapters. Minor editorial updates Minor editorial updates were made throughout the Configuration Guide. All chapters.

show breakout show breakout show breakout Displays information on 10 Gbps sub-ports broken out from 40 Gbps ports on certain FastIron devices. show breakout Privileged EXEC mode The show breakout command is available only on ICX 7750 devices. The show breakout command displays the following

devices support 8192 IGMP snooping group addresses. ICX 7450 devices support 8192 IGMP snooping group addresses. ICX 7650 switches support 8192 IGMP snooping group addresses. ICX 7750 routers support 6K IGMP snooping group addresses. The no form of this command restores the default maximum. The following example sets the maximum number of IGMP snooping group addresses to 1600. device# configure terminal device(config)# system-max igmp-snoop-group-addr 1600

configuration mode The system-max max-ecmp command is supported only on the Ruckus ICX 7750. If the maximum number of ECMP paths is not configured at the system level, by default, you can configure the maximum number of IP load sharing paths to a value from 2 through 8. The configuration of the maximum