Search Results: "icx 7750"

16 128 128 ICX 7750 16 128 128 ICX 8200 4 16 16 The no form of the command resets the VRF instance to the default value. The following example configures the maximum number of VRF instance as 20. device(config)# system-max ip-vrf 20 device(config)# write memory device(config)# end

configuration mode The no form of the command removes the configured loopback interface as overlay-gateway source interface. The command is supported only on ICX 7750 devices. The loopback interface must be configured prior to use in the overlay-gateway configuration. The loopback interface cannot belong

site. Overlay-gateway site configuration mode The no form of the command removes the extended VLAN configuration. The command is supported only on ICX 7750 devices. The VLAN must already be mapped to a VNI before it is extended over the gateway. The following example sets VLAN 10 to be extended over

the next port in the LAG. all Specifies that failover is to be enabled or disabled on all ports in the LAG. Dynamic LAG configuration mode The no form of this command disables LAG hardware failover. LAG hardware failover is supported only on Ruckus ICX 7750 devices. The following example enables LAG

is disabled by default on ICX 7750 devices, and enabled by default on ICX 7450 and ICX 7250 devices. Hardware entry optimization is enabled by default. oif-list Shares the Output Interface Lists across entries. all Specifies all types of Output Interface Lists. Global configuration mode The no form

-switch-cert-validate Enables the certificate validation. Global configuration mode On some ICX 7250, ICX 7450, or ICX 7750 devices, self-signed certificates are used. SmartZone honors these certificates when the non-tpm-switch-cert-validate command is entered on the SmartZone console. This command is

-switch-cert-validate Enables the certificate validation. Global configuration mode On some ICX 7250, ICX 7450, or ICX 7750 devices, self-signed certificates are used. SmartZone honors these certificates when the non-tpm-switch-cert-validate command is entered on the SmartZone console. This command is

-switch-cert-validate Enables the certificate validation. Global configuration mode On some ICX 7250, ICX 7450, or ICX 7750 devices, self-signed certificates are used. SmartZone honors these certificates when the non-tpm-switch-cert-validate command is entered on the SmartZone console. This command is

site. Overlay-gateway site configuration mode The no form of the command removes the extended VLAN configuration. The command is supported only on ICX 7750 devices. The VLAN must already be mapped to a VNI before it is extended over the gateway. The following example sets VLAN 10 to be extended over

the next port in the LAG. all Specifies that failover is to be enabled or disabled on all ports in the LAG. Dynamic LAG configuration mode The no form of this command disables LAG hardware failover. LAG hardware failover is supported only on Ruckus ICX 7750 devices. The following example enables LAG