-
Scenario 1 - Using Stack Interactive-setup to Create a Stack
Last Updated
Sep 03, 2026
configuration from the units (using the erase startup-config and reload commands for each one). An ICX 7650 device with startup-config flash using 40-Gbps stacking ports but no other configuration is treated as a clean unit. Because an ICX 7650 device that uses 40-Gbps stacking requires the rear-module stack
-
RUCKUS FastIron Stacking Configuration Guide, 10.0.20
Last Updated
Sep 03, 2026
configuration from the units (using the erase startup-config and reload commands for each one). An ICX 7650 device with startup-config flash using 40-Gbps stacking ports but no other configuration is treated as a clean unit. Because an ICX 7650 device that uses 40-Gbps stacking requires the rear-module stack
-
Scenario 1 - Using Stack Interactive-setup to Create a Stack
Last Updated
Sep 03, 2026
configuration from the units (using the erase startup-config and reload commands for each one). An ICX 7650 device with startup-config flash using 40-Gbps stacking ports but no other configuration is treated as a clean unit. Because an ICX 7650 device that uses 40-Gbps stacking requires the rear-module stack
-
Last Updated
Aug 25, 2026
RUCKUS ICX Switches
Product Guides
Administer and Manage
.................................................................................................................................................................. 9 What’s new in this document There were no new features for this guide in FastIron software release 08.0.91. Supported hardware This guide supports the following Ruckus products: • RUCKUS ICX 7850 Series • RUCKUS ICX 7650 Series • RUCKUS ICX 7450 Series • RUCKUS ICX 7250
-
Commands Si - Z
Last Updated
Sep 03, 2026
802.1br control bridge (CB) configuration mode, where SPX ports and LAGs are configured. spx cb-enable Enables a standalone ICX 7750 or ICX 7650 or an ICX 7750 or ICX 7650 stack as an SPX control bridge (CB). spx interactive-setup Allows you to configure several options interactively: change existing
-
Commands Si - Z
Last Updated
Sep 03, 2026
-enable Enables a standalone ICX 7750 or ICX 7650 or an ICX 7750 or ICX 7650 stack as an SPX control bridge (CB). spx interactive-setup Allows you to configure several options interactively: change existing PE IDs, discover and assign IDs to new PE units, and convert existing or new standalone devices to
-
Energy Efficient Ethernet
Last Updated
Sep 03, 2026
occur on the port when EEE is enabled or disabled. ICX 7650 and 7850 devices do not support EEE. Ports Supporting EEE on ICX 7150-ES Models Models Module Number Type Media Purpose Speed Details Port Number ICX 7150-24P-ES (PoE) 1 24x1-Gbps (PoE) Copper Downlink 1000BASE-T Base Module, 802.3at Type-2
-
Commands Si - Z
Last Updated
Sep 03, 2026
or ICX 7650 or an ICX 7750 or ICX 7650 stack as an SPX control bridge (CB). spx interactive-setup Allows you to configure several options interactively: change existing PE IDs, discover and assign IDs to new PE units, and convert existing or new standalone devices to PE units. spx pe-enable Enables
-
Commands Si - Z
Last Updated
Sep 03, 2026
port configuration. spx cb-configure Enters 802.1br control bridge (CB) configuration mode, where SPX ports and LAGs are configured. spx cb-enable Enables a standalone ICX 7750 or ICX 7650 or an ICX 7750 or ICX 7650 stack as an SPX control bridge (CB). spx interactive-setup Allows you to configure
-
RUCKUS FastIron Stacking Configuration Guide, 08.0.95
Last Updated
Sep 03, 2026
the manual steps of removing configuration from the units (using the erase startup-config and reload commands for each one). An ICX 7650 device with startup-config flash using 40-Gbps stacking ports but no other configuration is treated as a clean unit. Because an ICX 7650 device that uses 40-Gbps