Checking Settings Prior to Migrating from ZoneDirector to Unleashed Master

Because the ZoneDirector backup configuration file cannot be restored to the Unleashed Dedicated Master in Unleashed 200.13 or 200.14, you must manually check the settings in ZoneDirector and reconfigure the settings in the Unleashed Dedicated Master.

Log in to the ZoneDirector web interface and the Unleashed Dedicated Master web interface to check the items listed in the following table.

Checklist Prior to Migrating from ZoneDirector to Unleashed

Check Items Notes
System Version The ZoneDirector version must be 9.13 or later (recommended). Upgrade ZoneDirector to meet this requirement if the version is earlier than ZoneDirector 9.13.
APs Number The maximum number of APs allowed in the Unleashed Dedicated Master is 128. Ensure that the total number of APs to be migrated from ZoneDirector to Unleashed is less than 128. The maximum APs allowed in the Dedicated Unleashed is 128.
Device IP setting Ensure that ZoneDirector IP type is not IPv6 only. The Unleashed network does not support IPv6.
AP Models In Dedicated mode, the following AP models are supported: R710, T610, T610s, R610, T710, T710s, R720, R510, H510, H320, T310d, T310n, T310c, T310s, E510, C110, R320, M510, R750, R550, R650, T750, T750se, R850, H550, R350, T350d, T350c, H350, and T350se.
Note: 802.11n and 802.11ac Wave 1 AP models, such as the R500, R600, R700, H500, T300, R300, R310, zf7xxx, and so on, are not supported in the Unleashed network. Ensure that these AP models are not migrated to the Unleashed network.
AP Certificates Check that the status of the AP certificates is New Ruckus PKI Signed from the web interface. If any of the AP certificates show Old Ruckus PKI Signed, refresh them. Refer to the Certificate-Import Ruckus PKI Certificate Package to generate a RUCKUS PKI certificate request and submit the file to https://certrenewal.ruckuswireless.com.
Note: An AP with an old certificate will fail to migrate to Unleashed.
Country Code Ensure that the country code is the same between ZoneDirector and Unleashed.
Channel Range setting Keep all configurations the same between ZoneDirector and Unleashed.
Mesh configuration If Mesh is enabled, ensure that the Mesh Name (ESSID) and Mesh Passphrase are the same between ZoneDirector and Unleashed.
Users and Roles Keep all configurations the same between ZoneDirector and Unleashed.
Access Control Keep all configurations the same between ZoneDirector and Unleashed.
Hotspot services Keep all configurations the same between ZoneDirector and Unleashed.
AAA servers Keep all configurations the same between ZoneDirector and Unleashed.
WLANs Keep all configurations the same between ZoneDirector and Unleashed.
Guest Pass Keep all configurations the same between ZoneDirector and Unleashed.
DPSK Keep all configurations the same between ZoneDirector and Unleashed.
AP Group Keep all configurations the same between ZoneDirector and Unleashed.