User-Customized Alarms

The operator can define customized threshold crossing alarms (alerts) for various events crossing operator-defined thresholds. These alarms can be sent as SNMP traps to SNMP servers, and/or via an email to a group or user, and/or to a syslog event. Refer to Configuring Alarm Settings for configuration instructions.

Setting user customized alerts requires defining two thresholds per event type, and then activating the corresponding alarms for the event type.

For instance, if the event type is AP # of clients and the thresholds are 100 and 200 clients, then Unleashed Multi-Site Manager can send alarms:

  • When the client count goes up to 100 (send low-threshold alarm set TCA)
  • When the client count goes up to 200 (send high-threshold alarm set TCA)
  • When the client count goes down to 200 (send high-threshold alarm clear TCA)
  • When the client count goes down to 100 (send low-threshold alarm clear TCA)
Note: For any alarms to be sent, the SNMP server information and/or email system information must be configured as described in Configuring Alarm Settings before Unleashed Multi-Site Manager can send the alarms.