Disable SNMP Agents

Using the controller interface navigate to Access Points. Select the AP and click on the Configuration tab. In the configuration page select AP SNMP Options to disable the AP SNMP option for all APs as seen in the below figure. Make sure that the Enable AP SNMP button is turned off.

Disable AP SNMP for all APs

Using the controller interface navigate to Access Points. Select the AP and click on the Configuration tab. In the configuration page select AP SNMP Options to disable the AP SNMP option in a Zone for all APs as seen in the below figure. Make sure that the Enable AP SNMP button is turned off.

Disable AP SNMP for APs in a AP Zone

Using the controller interface navigate to Access Points. Select the AP Group and click on the Configuration tab. In the configuration page select AP SNMP Options to disable the AP SNMP option in a AP Group for all APs as seen in the below figure. Make sure that the Enable AP SNMP button is turned off.

Disable AP SNMP for AP Group in a AP Zone

To disable AP SNMP for AP Zone in Zone Template navigate to the controller user interface System > Templates > Zone Template. Select the required zone template and click on the Configuration tab. In the configuration page select AP SNMP Options to disable the AP SNMP option. Make sure that the Enable AP SNMP button is turned off.

Disable AP SNMP for AP Zone in a AP Zone Template

To disable AP SNMP for an AP Zone in a Zone Template pertaining to AP Groups navigate to the controller user interface Access Points. . Select the AP Group and click on the Configuration tab. In the configuration page select AP SNMP Options to disable the AP SNMP option in a AP Group for all APs as seen in the below figure. Make sure that the Enable AP SNMP button is turned off.

Disable AP SNMP for AP Zone in a AP Zone Template in AP Group