show vxlan-gpe tunnel

Displays the Generic Protocol Extension for Virtual Extensible LAN (VxLAN-GPE) tunnel information for the RUCKUS Edge device.
Syntax
show vxlan-gpe tunnel
Command Default

No command default.

Modes

Network mode

The show vxlan-gpe tunnel command displays the following information.

Usage Guidelines

This command is supported only on the RUCKUS Edge device.

Examples
Network# show vxlan-gpe tunnel
[0] lcl 172.20.20.100 rmt 172.20.20.200 lcl_port 4790 rmt_port 4790 vni 16777215 fib-idx 0 sw-if-idx 6 user 0 pmtu-user-type 3 pmtu-user-inst 2 pmtu 1450 decap-next-protocol ethernet
[1] lcl 172.20.20.100 rmt 172.20.20.5 lcl_port 4790 rmt_port 4790 vni 50 fib-idx 0 sw-if-idx 7 user 1 pmtu-user-type 2 pmtu-user-inst 2 pmtu 1450 decap-next-protocol ethernet
[2] lcl 172.20.20.100 rmt 172.20.20.5 lcl_port 4790 rmt_port 4790 vni 100 fib-idx 0 sw-if-idx 8 user 1 pmtu-user-type 2 pmtu-user-inst 2 pmtu 1450 decap-next-protocol ethernet
[3] lcl 172.20.20.100 rmt 172.20.20.3 lcl_port 4790 rmt_port 4790 vni 100 fib-idx 0 sw-if-idx 9 user 1 pmtu-user-type 2 pmtu-user-inst 2 pmtu 1450 decap-next-protocol ethernet
[4] lcl 172.20.20.100 rmt 172.20.20.5 lcl_port 4790 rmt_port 4790 vni 16777215 fib-idx 0 sw-if-idx 11 user 2 pmtu-user-type 4 pmtu-user-inst 0 pmtu 1450 decap-next-protocol ethernet
[5] lcl 172.20.20.100 rmt 172.20.20.200 lcl_port 4790 rmt_port 4790 vni 100 fib-idx 0 sw-if-idx 12 user 1 pmtu-user-type 3 pmtu-user-inst 2 pmtu 1450 decap-next-protocol ethernet
[6] lcl 172.20.20.100 rmt 172.20.20.3 lcl_port 4790 rmt_port 4790 vni 16777215 fib-idx 0 sw-if-idx 13 user 2 pmtu-user-type 4 pmtu-user-inst 0 pmtu 1450 decap-next-protocol ethernet
Release version Command history
2.1.0 This command was introduced.