show peer-tunnel-ka

This command displays the status of the peer-tunnel keepalive.
Syntax
show peer-tunnel-ka
Command Default

No command default.

Modes

Network mode

The show peer-tunnel-ka command displays the following information.

Output field Description
TUNNEL-ID Displays the tunnel ID.
SERVICE Displays the service name.
SERVICE-ID Displays the serice ID.
Initiator Displays if the Edge device is an initiator or a responder. Yes indicates an initiator and No indicates a responder.
KA-TUN-STATUS Displays if the status of the keep alive tunnel Up or Down.
UP-TIME Dislays the time since the tunnel is up. The value of this is current time - start time of the tunnel creation.
KA-TUN-STATE Displays th state of tunnel out. Foe example, INIT, CONNECTING, CONNECTED and VRRP_BACKUP_WAIT.
Local-Addr Displays the local IP address of the Edge device.
Remote-Addr Displays the peer IP address of the peer tunnel keepalive.
Remote-Index Peer Index in randomized remote address array list to which the local Edge node connects.
FB-TIME-LEFT Displays scheduled time remaining for the next fallback.
Usage Guidelines

This command is supported only on the RUCKUS Edge device.

Examples

The below example displays the SD-LAN tunnel keepalive information on Data Center Edge.

=============When tunnel status is up=====================
Network# show peer-tunnel-ka
TUNNEL-ID SERVICE  SERVICE-ID Initiator KA-TUN-STATUS UP-TIME
3         SDLAN    2          Yes       Up            0Y0M0D 0h2m26s
 
KA-TUN-STATE      Local-Addr           Remote-Addr          Remote-Index  FB-TIME-LEFT
CONNECTED         172.20.20.33         172.20.20.42         0             0Day 23Hrs 6Mins 23Secs
 
=============When tunnel status is down===================
Network# show peer-tunnel-ka
TUNNEL-ID SERVICE  SERVICE-ID Initiator KA-TUN-STATUS UP-TIME
1         SDLAN    2          Yes       Down          -
 
KA-TUN-STATE      Local-Addr           Remote-Addr          Remote-Index  FB-TIME-LEFT
CONNECTING        172.20.20.33         172.20.20.42         0               0Day 23Hrs 6Mins 23Secs

The below example displays the SD-LAN tunnel keepalive information on DMZ Edge.

=============When tunnel status is up=====================
Network# show peer-tunnel-ka
TUNNEL-ID SERVICE  SERVICE-ID Initiator KA-TUN-STATUS UP-TIME
1         SDLAN    3          No        Up            0Y0M0D 0h6m48s
 
Local-Addr           Remote-Addr
172.20.20.42         172.20.20.33
 
=============When tunnel status is down===================
Network# show peer-tunnel-ka
TUNNEL-ID SERVICE  SERVICE-ID Initiator KA-TUN-STATUS UP-TIME
1         SDLAN    3          No        Down          -
History
Release version Command history
2.2.0 Supporting fallback feature.
2.1.0 This command was introduced.