Onboarding a Single-Node Cluster
- Log in to the RUCKUS One web user interface with your credentials.
- On the navigation bar, click .This displays the RUCKUS Edge page.
- In the RUCKUS Edge page, click Add and select Cluster. This displays the Add Cluster page.
- In the Add Cluster page, enter the following details:
- In the RUCKUS Edges
section, enter the following details:
- RUCKUS Edge Name: Enter a meaningful name for the node.
- Serial Number: Enter the serial number of the RUCKUS Edge device. You can obtain the serial number by logging in to the RUCKUS Edge CLI or by looking at the label on the physical RUCKUS Edge device.
- Model: After the serial number is entered, the model name is displayed automatically.
Important: In a single-node setup, the absence of redundancy eliminates the need for Virtual Router Redundancy Protocol (VRRP) addresses and any cluster-related configuration.Note: The one-time-password (OTP) is automatically sent to your email address or through the SMS for verification when you add a virtual RUCKUS Edge node. The password expires in 10 minutes and you must complete the authentication process before the OTP expires; otherwise you will have to request a new OTP.

