RUCKUS Network Director Overview

RUCKUS Network Director is a software solution that provides Ruckus customers a simple, easy to use and completely secure controller discovery mechanism for securely adding and registering Ruckus APs to be managed by an appropriate SmartZone controller.

RUCKUS Network Director provides configuration management to configure the AP to the SZ cluster, and the APs and controller mappings are fully controllable. RUCKUS Network Director can be provisioned either through the user interface of the RUCKUS Network Director admin portal or using secure JSON APIs. RUCKUS Network Director monitors the network and syncs the status of the APs with respect to their SZ configurations, and reports any inconsistencies.

Additionally, RUCKUS Network Director provides Ruckus Network Management functionality and consolidates the data and events across the network into a single holistic graphical representation of the entire network.

RUCKUS Network Director Network Architecture

The following stages describe the central controller discovery process.

  • The customer's provisioning system configures the RUCKUS Network Director through the RUCKUS Network Director admin portal or using APIs. RUCKUS Network Director can pre-configure the APs into Cluster. APs can be mapped to the SZ cluster and zone in the RUCKUS Network Director based on the AP serial number, AP model, or you can configure IP address range using Subnet for AP discovery.
  • Regional DHCP server provides the RUCKUS Network Director address to the AP.
  • During the discovery process, the AP contacts RUCKUS Network Director and RUCKUS Network Director gives a set of SZ controller IP addresses to the AP. If the APs are not configured with cluster details, RUCKUS Network Director routes the APs to the default SZ. For this, the default cluster must be configured on the RUCKUS Network Director.
  • The AP connects to SZ based on the SZ address it received from RUCKUS Network Director.