AP Registration Rules

APs can be pre-configured and mapped to the SZ cluster and zone in RUCKUS Network Director. Though RUCKUS Network Director provides the option to import all the associated APs while adding the cluster, APs can be provisioned separately by configuring the following AP registration rules to assign the APs to SZ cluster:
  • AP registration by AP model: Allows you to map the AP model to a SZ cluster or zone.
  • AP registration by IP/Subnet mask: Allows you to add IP address range using Subnet for AP discovery. During AP discovery, if RUCKUS Network Director finds a matching IP address in one of the subnets defined in the rules, the AP will be assigned to the associated SZ cluster.
  • AP registration by AP serial number: Allows you to map the AP serial number to a SZ cluster or zone.

If all the three registration rules are configured for an AP, by default AP discovery based on AP serial number takes precedence. The order of priority for AP discovery is as follows:

  1. AP serial number
  2. AP model
  3. IP subnet

You can change the order of priority and make AP discovery by AP model to take precedence by enabling the Always prioritize by AP Model option in the AP Model tab. If the Always prioritize by AP Model option is enabled, it takes effect for the APs that are already configured. If the APs are not configured with any of the registration rules, RUCKUS Network Director routes the APs to the default SZ. For this, the default cluster must be configured on the RUCKUS Network Director.