Adding a Cluster

Complete the following steps to add a cluster.
  1. On the menu, click Inventory.
    The Inventory window is displayed.
  2. In the Clusters tab, click to add a cluster.
    The Add New Cluster dialog box is displayed.
  3. Complete the following fields to add a cluster.
    • Cluster Name: Enter a name for the cluster.
    • Management Host Name / (or IP address): Enter the management host name or management IP address of the cluster.
    • Login ID: Enter the username of the cluster.
    • Password: Enter the password of the cluster.
    All communication from RUCKUS Network Director happen through HTTPS and the login credentials provided here are used in the communication with the controller.
    • Tag: Enter a name for the tag. You can provide the same tag to multiple clusters and group the clusters by tag.
    • Import AP: If enabled, imports all APs on the cluster at the moment. When another AP joins a SZ cluster, it does not trigger a live joining action to RND until next round of sync happens between RND and SZ via API calls. If this option is not enabled, the APs are not imported and only the statistics of the cluster can be viewed. If you choose to skip this action, refer to Importing APs to a Cluster to know how to import APs later.
    • Default Cluster: If selected, the cluster is defined as the default cluster.
    APs that do not have any configuration details (serial number or cluster details) are routed to the default cluster by the RUCKUS Network Director. You can change the default cluster in the System Settings window. For more details, refer Managing System Settings.
    • Test Connection: Allows you to check whether the cluster is accessible from the RUCKUS Network Director.
  4. Click Add to add the cluster to the RUCKUS Network Director.
    An information dialog box is displayed indicating that the cluster is successfully created.
  5. Click Ok.
    The newly added cluster will be listed in the Cluster tab of Inventory window.