Managing System Settings

Complete the following steps to change the default settings.
  1. On the menu, go to Admin > System Settings.
    The System Settings window is displayed.
  2. In the Settings tab, make changes to the required system settings described below and click Update to make the changes take effect.
    • Allow unregistered AP join default cluster: By default, this option is enabled and the APs that are configured without any cluster details are routed to the default cluster. If this option is not enabled, APs without cluster details will be rejected.
    • Default Cluster: Allows you to change the default cluster.
    • Select Time Zone: Allows you to change the system time zone.
    • Custom Logo: Allows you to change the logo.
    • Change Password: Allows you to change the password.
    • Config: Allows you to schedule and control the polling process that collects current SZ status information and updates the information in RUCKUS Network Director.
      • Enable Sync-Up: If selected, the current SZ status information is updated in the RUCKUS Network Director server at defined intervals.
      • Frequency: The configuration sync-up schedule can be defined at the following frequency:
        • 15 minutes
        • 30 minutes
        • 1 hour
        • 12 hours
        • 24 hours
    Color Theme Customization

    The charts and graphs for SZ clusters and APs have a color-coded scheme to indicate their status (Online, Flagged, and Offline). The color of the charts and the status can be customized as per your preferences. Click each of the status (Online, Flagged, or Offline) and choose the color from the color palette. Similarly, you can choose the color for the dashboard charts. After the choosing the color, click Update to make the changes take effect. Click Reset to reset the color theme to the default color theme settings.

Managing Configuration Backups

Backup of the SZ configurations can be scheduled at a specified frequency and the configuration backups can be uploaded at a later point in time based on the requirement. The backup setting allows you to specify the location where you want to store the configuration backups. Configuration backups can be stored in RUCKUS Network Director server and SFTP server.

Complete the following steps to define SZ configuration backup settings.

  1. In the System Settings window, select Config Backups tab.
  2. Complete the following fields to configure the backup settings.
    • Store Locally: If enabled, the SZ configuration backups are stored on the RUCKUS Network Director server.
    • Store in SFTP Location: If enabled, the SZ configuration backups are stored on the SFTP server.

      Upon selection of Store in SFTP Location option, the following SFTP server setting fields are displayed which need to be configured.

      • Host: Enter the IP address or host name of the server.
      • Port: Enter the port number to be used to connect to the SFTP server.
      • Username: Enter the user name for connections to the server.
      • Password: Enter the password for connections to the server.
      • Remote Dir: Enter the path to the directory on the SFTP server where configuration backup files are stored.
    • Backup Recurrence: Schedule the frequency at which SZ configuration backup must take place. The backup scheduling can be defined at the following frequency:
      • None - By default, backup scheduling frequency is not configured.
      • 6 hours
      • 12 hours
      • 24 hours
  3. Click Apply to save the configuration backup settings.
    Note: The configuration backups of each cluster are listed in the Config Backups tab in the individual cluster details window that can be accessed from Inventory > Clusters tab. For more information about the actions that can be performed on the configuration backup, refer to the details of the Config Backups tab described in Viewing individual cluster details.