Adding a User Account

An admin account with all the privileges (Super Admin role) is created with default credentials during set up. The default admin user can add more user accounts to delegate administration and management tasks to other users.

RUCKUS Network Director allows you to create user accounts with role-based access control in RUCKUS Network Director. Role-based access control governs the permissions granted to a user by assigning specific roles to a user account. Each role has a certain degree of privileges or permissions that determine the functional access level.

RUCKUS Network Director supports the following roles:

  • Super Admin: A user who is assigned the role of super admin has complete privileges and can perform any actions on all the modules.
  • Admin: A user who is assigned the role of admin has restricted privileges and is not allowed to perform RUCKUS Network Director system-level tasks such as DB backup, upgrade, user creations and so on. The user works at the level of an operator with the privileges to configure clusters and APs.
  • View: The user assigned with the View role is limited to monitoring the system and is permitted only to view information but cannot create, modify, or delete it.

User Authentication support through AD and LDAP

Ruckus Network Director supports additional user accounts that can be authenticated using external authentication server such as Lightweight Directory Access Protocol (LDAP) and Active Directory (AD). Ruckus Network Director supports authentication of three types of users classified in terms of the location where they are stored.

  • Local users: Local users are users that are created, stored and managed on the Ruckus Network Director's local database. Such users can access the Ruckus Network Director application once the user login credentials are validated against the user details in the Ruckus Network Director server.
  • AD users: Users stored in the Active Directory server.
  • LDAP users: Users stored in LDAP server.
    Note: In 2.0 release, single sign-on to SZ is not available for AD users and LDAP users.

With the addition of AD and LDAP support for user authentication, enterprise-wide authentication support is provided, irrespective of the location where the user identities are stored. To enable user authentication through AD and LDAP, the server credentials of both AD and LDAP must be configured in RUCKUS Network Director. In addition to this, you must establish a mapping between the user attributes and the user role, so that the user can be authenticated and apply the role policy.

Complete the following steps to add a user account.

  1. On the menu, go to Admin > Users.
    The Users window is displayed.
  2. In the Users tab, click to add a user account.
    The Add New User dialog box is displayed.
  3. Complete the following fields to add a user.
    • Username: Enter a username.
    • Email ID: Enter the Email ID of the user.
    • Password: Enter the password.
    • Time Zone: Select a time zone from the dropdown list.
    • Role: Select one of the following roles from the dropdown list.
      • Super Admin: A user who is assigned the role of super admin has complete privileges and can perform any actions on all the modules.
      • Admin: A user who is assigned the role of admin has restricted privileges and is not allowed to perform RUCKUS Network Director system-level tasks such as DB backup, upgrade, user creations and so on. The user works at the level of an operator with the privileges to configure clusters and APs.
      • View: The user assigned with the View role is limited to monitoring the system and is permitted only to view information but cannot create, modify, or delete it.
    Once logged in to the RUCKUS Network Director application, the user can change the password and time zone in the System Settings window. For more details, refer Managing System Settings.
  4. Click Add. An information dialog box is displayed indicating successful creation of a user account.

Configuring AD Settings

To enable user authentication through AD, configure AD settings by completing the following steps.
  1. In the Users window, select the AD tab.
  2. Click Create AD Settings.
    The window expands to display the fields required to configure AD settings.
  3. Complete the following fields to configure AD server credentials.
    • IP Address: Enter the IPv4 address of the AD server.
    • Port: Enter the port number of the AD server. The default port number (389) should not be changed unless you have configured the AD server to use a different port.
    • Windows Domain Name: Enter the Windows domain name assigned to the AD server.
    • Role Mapping: Based on the AD group ID for the users, the user roles can be mapped in the RUCKUS Network Director to integrate with AD. This establishes the mapping between the user attributes and the user roles, to authenticate the user and apply the role policy. For example, the following role attributes can be mapped.
      • SUPERADMIN: CN=nd_super
      • ADMIN: CN=nd_operator
      • VIEW: CN=nd_monitor
  4. Click Save to save the AD server settings in RUCKUS Network Director.
  5. (Optional) To test the AD server connection, click Test Connection.
    The AD dialog box is displayed.
    1. Complete the following fields:
      • Username: Test the connection using the username.
      • Password: Enter the password.
    2. Click Test.

Configuring LDAP Settings

To enable user authentication through LDAP, create LDAP settings by completing the following steps.
  1. In the Users window, select the LDAP tab.
  2. Click Create LDAP Settings.
    The window expands to display the fields required to configure LDAP settings.
  3. Complete the following fields to configure LDAP server credentials.
    • IP Address: Enter the IPv4 address of the LDAP server.
    • Port: Enter the port number of the LDAP server. Default is 389.
    • Base Domain Name: Enter the base DN in LDAP format for all user accounts.
    • Admin Domain Name: Enter the admin DN in LDAP format.
    • Admin Password: Enter the administrator password for the LDAP server.
    • Confirm Password: Retype the administrator password to confirm.
    • Key Attribute: Enetr a key attribute to denote users (for example, default: uid)
    • Search Filter: Enter a search filter
    • Role Mapping: Based on the LDAP group ID for the users, the user roles can be mapped in the RUCKUS Network Director to integrate with LDAP. This establishes the mapping between the user attributes and the user roles, to authenticate the user and apply the role policy. For example, the following role attributes can be mapped.
      • SUPERADMIN: CN=nd_super
      • ADMIN: CN=nd_operator
      • VIEW: CN=nd_monitor
  4. Click Save to save the LDAP server settings in RUCKUS Network Director.
  5. (Optional) To test the AD server connection, click Test Connection.
    The LDAP dialog box is displayed.
    1. Complete the following fields:
      • Username: Test the connection using the username.
      • Password: Enter the password.
    2. Click Test.