AP Registration Rules

APs can be pre-configured and mapped to the SZ cluster and zone in RUCKUS Network Director. Though RUCKUS Network Director provides the option to import all the associated APs while adding the cluster, APs can be provisioned separately by configuring the following AP registration rules to assign the APs to SZ cluster:
  • AP registration by IP/Subnet mask: Allows you to add IP address range using Subnet for AP discovery. During AP discovery, if RUCKUS Network Director finds a matching IP address in one of the subnets defined in the rules, the AP will be assigned to the associated SZ cluster.
  • AP registration by AP serial number: Allows you to map the AP serial number to a SZ cluster or zone.

Configuring Registration Rules for Subnet-based AP assignment

Complete the following steps to configure subnet-based AP registration rules to assign APs to SZ.
  1. On the menu, go to Inventory > AP Reg. Rules.
    The AP Registration Rules window is displayed.
  2. In the IP/Subnet tab, click .
    The Add New Registration Rule window is displayed.
  3. Complete the following fields to add registration rule.
    • Region: Add a region or select a region from the dropdown list.
    • IP Address Type: Select IPv4 or IPv6 from the dropdown list.
    • IP: Enter the starting IP address.
    • Subnet Mask: Enter the subnet mask.
    • Cluster: From the dropdown list, select a cluster to which you want to add the AP.
    • Zone: Select an AP zone from the dropdown list.
    The Domain hierarchy is displayed in the dropdown list. You can select a zone under a specific domain and it helps you to route APs to the right controller and zone within that cluster.
  4. Click Add to add the registration rule.
    An information dialog box is displayed indicating that the registration rule is successfully added.
  5. Click Ok.

Configuring Registration Rules based on AP serial number

Complete the following steps to add APs to a cluster based on AP serial number.
  1. On the menu, go to Inventory > AP Reg. Rules.
    The AP Registartion Rules window is displayed.
  2. In the AP Serial (S/N) tab, click .
    The Add New AP dialog box is displayed.
  3. Complete the following fields to add an AP.
    • AP Serial: Enter the serial number of the AP.
    • AP Name: Enter a name for the AP.
    • Cluster: From the dropdown list, select a cluster to which you want to add the AP.
    • Zone: Select an AP zone from the dropdown list.
    The Domain hierarchy is displayed in the dropdown list. You can select a zone under a specific domain and it helps you to route APs to the right controller and zone within that cluster.
    Note: If cluster and zone details are not provided, RUCKUS Network Director will route the AP to the default cluster.
  4. Click Add to add the AP to the specified cluster.
    An information dialog box is displayed indicating that the AP is successfully added to the cluster.
  5. Click Ok.
    Alternatively, you can add APs to the RUCKUS Network Director by importing APs in bulk. Click Bulk Import instead? and upload the csv file to import APs in bulk. For complete instruction on how to import APs by uploading csv file, refer Importing APs in Bulk.

Viewing Configuration types and Connection Status of APs

APs are added to the RUCKUS Network Director in different ways. You can view the various configuration methods by which APs are added to the ND and the connection status of the APs from the AP Serial (S/N) tab.

Config Type: Displays the following configuration states based on the methods by which APs are added:

  • Provisioned: If the AP is added to a cluster based on the serial number in the RUCKUS Network Director.
  • DEFAULT PROVISIONED: If a non-configured AP is discovered and added to default cluster.
  • Imported: If the AP is added to the SZ using the import action from the cluster.
  • UnProvisioned: If the APs are rejected.

Connect Status: Displays the following AP connection status:

  • PROVISIONED: If the AP is configured in the RUCKUS Network Director with SZ and Zone assigned to that AP.
  • Pre Provisioned: If the AP is configured both in RUCKUS Network Director and SZ.
  • Rejected: If the default cluster is not configured and the AP without cluster details (or which is not configured in the ND) contacts the RUCKUS Network Director.
  • Flagged: If the AP is connected in the SZ and has the Flagged status, the RUCKUS Network Director displays the AP as Flagged.
  • NOTINCLUSTER: If the AP made successful discovery request to the RUCKUS Network Director, but not found in the SZ during the status sync-up.
  • Connected: If the AP is connected in SZ.