debug ipv6 rip

Displays debugging information about the IPv6 Routing Information Protocol (RIP) events.
Syntax
debug ipv6 rip eventsevents
debug ipv6 rip{receive|transmit}{ethernetstackid/slot/port|lagnumber|tunnelnumber| venumber}
no debug ipv6 rip{receive|transmit}[ethernetstackid/slot/port|lagnumber|tunnelnumber| venumber]
Parameters
events
Specifies RIP events.
receive
Specifies IPv6 RIP packets received.
transmit
Specifies IPv6 RIP packets transmitted.
ethernetstackid/slot/port
Specifies an Ethernet interface.
lagnumber
Specifies a LAG interface.
tunnelnumber
Specifies a tunnel interface.
venumber
Specifies a VE interface.
Modes

Privileged EXEC mode

Usage Guidelines

The no form of the command disables the displaying of IPv6 RIP debugging information.

Examples

Please confirm example
The following example displays debugging information for IPv6 RIP packets received.

device# debug ipv6 rip events
device(config-vif-11)# RIPng: update timer expired
clear ipv routeRIPng: triggered update
RIPng: garbage prefix 2001:DB8::/64 timer 1, metric 0, tag 0
from :: on interface NULL
RIPng: garbage prefix 2001:DB8::/64 timer 1, metric 0, tag 0
from :: on interface NULL
RIPng: Adding local connected route 2001:DB8::1/64 on interface v11
RIPng: Adding local connected route 2001:DB8::1/64 on interface v12
RIPng: update timer expired
RIPng: Redistribute add route 2001:DB8::/64, type CONNECTED (1/0)
RIPng: Redistribute add route 2001:DB8::/64, type CONNECTED (1/0)
Parent topic: Debug Commands H - P