New In This Document
The following list describes changes to this guide for all FastIron 09.0.10 and 09.0.00 releases.
Note: FastIron releases 09.0.00, 09.0.00a, and 09.0.10 are no longer available for download due to the discovery of a critical defect.
Refer to TSB 2022-001 – FastIron 09.0.00 and 09.0.10 - Risk of Filesystem Corruption on the Technical Support Bulletins page for more details.
RUCKUS recommends upgrading to FastIron release 09.0.10a or later for all ICX switches currently running any of the afore-mentioned releases.
All the software features supported in FastIron release 09.0.00, 09.0.00a, and 09.0.10 remain available and supported in FastIron release 09.0.10a and later releases unless specifically noted.
For completeness, the feature descriptions for all changes introduced in the unavailable releases; that is, FastIron 09.0.00, 09.0.00a, and 09.0.10, are included in this section.
Summary of changes in FastIron release 09.0.10a
|
Feature |
Description |
Location |
|---|---|---|
| Distributed Logger | Distributed Logger is a simple debug log filtering facility for application debug logs. It provides a common infrastructure for each of the applications to filter logs at sub-module level and the corresponding sub-modules further with different severity levels. This filtering capability provided by the distributed logger helps to perform detailed debugging with complete control on enabling debug logs. | Refer to Distributed Logger |
| Accessing debug logs through Log Manager | Beginning with 09.0.00 release, the logs that are
generated using the debug and distributed logger utilities are sent
to the Log Manager. The Log Manager infrastructure provides the
capability to store the application log files in a centralized
repository. The centralized repository can be accessed to display
the log files using the show logging
debug command. |
Refer to Log Manager |
| Log Manager | Log manager is enhanced to upload the fetched logs to an external server. It also allows you to monitor real-time updates to the specified logs on local units. | Refer to Log Manager |
| Unsupported hardware | This release and future releases do not support ICX 7750 devices. | References have been removed throughout the guide. |
| Unsupported feature | This release and future releases do not support Campus Fabric (SPX). | References have been removed throughout the guide. |
New Commands for FastIron 09.0.10a
The following commands have been introduced in this release.
Modified Commands for FastIron 09.0.10a
Deprecated Commands for FastIron 09.0.10a
The following commands have been deprecated in this release.
debug alldebug acl logdebug bum-rate-limitdebug cluster aging-disabledebug cluster alldebug cluster bpdu-forwardingdebug cluster ccpdebug cluster client-auto-detectdebug cluster configdebug cluster forwardingdebug cluster fsmdebug cluster icl-na-disabledebug cluster intf-macdebug cluster mdupdebug cluster showdebug cluster stpdebug ddos-attackdebug destinationdebug dot1x hitlessdebug dot1x-eventsdebug dot1x-filterdebug dot1x-miscdebug dot1x-mkadebug dot1x-packetsdebug dot1x-timersdebug gvrpdebug ip arp inspectiondebug ip dhcp snoopingdebug ip igmp add-del-oif alldebug ip igmp down-portdebug ip igmp packetdebug ip igmp prime-port ethernetdebug ip igmp timerdebug ip pim control-sourcedebug ip pim physical-port ethernetdebug ip source guarddebug ip source_guard_print_counterdebug ip source_guard_print_timersdebug ip source_guard_reset_counterdebug ip source_guard_trasaction-dbdebug ipv6 mld add-del-oif alldebug ipv6 mld detaildebug ipv6 mld mcache-groupdebug ipv6 mld prime-port ethernetdebug ipv6 mld timerdebug ipv6 mld vlandebug ipv6 raguarddebug mac-authenticationdebug mld-snoop mcache-groupdebug pp-bum-trunk-hashdebug stack pe controldebug stack pe macdebug stack pe topodebug tcam-snapshot-dumpdebug traffic-policyshow tech-supportrestconf platform-debug-levelrestconf protocol-debug-level
- Feature Column
The Feature column shows the name of each new, updated, or deleted feature in a separate row.
- Description Column
The Description column shows a brief description of the new, updated, or deleted feature.
The Description need not be too lengthy. Begin each description with the notation New, Updated, or Deleted before including a description of the feature or change.
- Reference Column
The Reference column shows a cross-reference (live link whenever possible) to the appropriate section in the document.
There must be some indication of what has been updated in the released document because there must be some form of change that requires the republication of the document. For documents in which there are no new features or only minor changes, some mention of updates to the guide should be included in the table. For example, some forms of general updates could be listed in the following ways:
- Editorial updates and corrections
- Addressing reported defects
- Unsupported software
- Unsupported hardware
- Unsupported feature
The reference to these types of changes could be “Throughout the guide” or “References have been removed throughout the guide.” The goal is to indicate that the change or deletion has occurred throughout the document.