Viewing the Serial Number of the Device
Use the
show version command to verify the serial number, software and hardware license package name,
and the LID of all units in the device. The following example is sample output from
an ICX unit with the L3-PREM-2x10G package installed on unit 1 and L3-PREM-8x10G installed
on unit 2.
device> show version Copyright (c) 2017 Ruckus Wireless, Inc. All rights reserved. UNIT 1: compiled on Jul 25 2017 at 12:04:34 labeled as SPR08070b1 (29789712 bytes) from Secondary SPR08070b1.bin SW: Version 08.0.70b1T213 Compressed Boot-Monitor Image size = 786944, Version:10.1.09T215 (spz10109b008) Compiled on Wed Sep 21 05:58:52 2016 UNIT 2: compiled on Jul 25 2017 at 12:04:34 labeled as SPR08070b1 (29789712 bytes) from Secondary SPR08070b1.bin SW: Version 08.0.70b1T213 Compressed Boot-Monitor Image size = 786944, Version:10.1.09T215 (spz10109b008) HW: Stackable ICX7250-24 ========================================================================== UNIT 1: SL 1: ICX7250-24 24-port Management Module Serial #:DUH3821L070 License: ICX7250_L3_SOFT_PACKAGE (LID: fwjINHGnFMF) Current License: L3-PREM-2x10G P-ASIC 0: type B344, rev 01 Chip BCM56344_A0 ========================================================================== UNIT 1: SL 2: ICX7250-SFP-Plus 8-port 80G Module ========================================================================== UNIT 2: SL 1: ICX7250-24 24-port Management Module Serial #:DUJ3845L0FV License: ICX7250_L3_SOFT_PACKAGE (LID: fwlINJKnFhx) Current License: L3-PREM-8x10G ========================================================================== UNIT 2: SL 2: ICX7250-SFP-Plus 8-port 80G Module ========================================================================== 1000 MHz ARM processor ARMv7 88 MHz bus 8192 KB boot flash memory 2048 MB code flash memory 2048 MB DRAM STACKID 1 system uptime is 32 minute(s) 12 second(s) STACKID 2 system uptime is 35 minute(s) 13 second(s) The system started at 22:01:42 GMT+00 Tue Jul 25 2017 The system : started=warm start reloaded=by "reload" My stack unit ID = 1, bootup role = active