Displaying the license configuration for PoD ports after a license upgrade

The show pod command is used to display the license configuration for PoD ports in a stack after a license upgrade on the ICX 7250.

The show pod command displays the license configurations for all PoD ports for all the units in a stack..

device# show pod 
Unit-Id: 1    
PoD license capacity:  8     
PoD license capacity used:   8 

PoD-ports  Lic-Available Lic-Used    
1/2/1      Yes             Yes        
1/2/2      Yes             Yes        
1/2/3      Yes             Yes        
1/2/4      Yes             Yes        
1/2/5      Yes             Yes        
1/2/6      Yes             Yes        
1/2/7      Yes             Yes        
1/2/8      Yes             Yes        

Unit-Id: 11   
PoD license capacity:  8     
PoD license capacity used:   8 

PoD-ports  Lic-Available Lic-Used    
11/2/1     Yes             Yes        
11/2/2     Yes             Yes        
11/2/3     Yes             Yes        
11/2/4     Yes             Yes                                    
11/2/5     Yes             Yes        
11/2/6     Yes             Yes        
11/2/7     Yes             Yes        
11/2/8     Yes             Yes

The following table describes the information displayed in the output of the show pod command.

Output from the `show pod` command

Field	Description
Unit-Id	The unit ID number of the PoD port.
PoD license capacity	The port capacity of the PoD license that was purchased.
PoD license capacity used	The number of PoD ports that are upgraded to 10-Gbps speed.
PoD-ports	The list of PoD ports in the PoD unit.
Lic-Available	Whether the license is available for the port.
Lic-Used	Whether the license is used by the port.

RUCKUS FastIron Software Licensing Guide, 08.0.95 53-1005665-02

Displaying the license configuration for PoD ports after a license upgrade

Output from the show pod command

Output from the `show pod` command