Enabling IP Source Guard for a VLAN

You can enable IP Source Guard (IPSG) on a switch or a router for a range of ports in a VLAN or on the entire VLAN.
  1. Enter global configuration mode. 
    device# configure terminal
  2. Configure the port-based VLAN. 
    device(config)# vlan 12
  3. Add ports Ethernet 1/1/5 through 1/1/8 as untagged ports. 
    device(config-vlan-12)# untagged ethernet 1/1/5 to 1/1/8
  4. Add ports Ethernet 1/1/23 through Ethernet 1/1/24 as tagged ports. 
    device(config-vlan-12)# tagged ethernet 1/1/23 to 1/1/24
  5. Enable IPSG on the tagged ports. 
    device(config-vlan-12)# source-guard enable ethernet 1/1/23 to 1/1/24

The following example configures IPSG on a VLAN. 

device# configure terminal
device(config)# vlan 12
device(config-vlan-12)# untagged ethernet 1/1/5 to 1/1/8
device(config-vlan-12)# tagged ethernet 1/1/23 to 1/1/24
device(config-vlan-12)# source-guard enable ethernet 1/1/23 to 1/1/24

The following example configures IPSG on a single port on a VLAN. 

device# configure terminal
device(config)# vlan 12
device(config-vlan-12)# untagged ethernet 1/1/5 to 1/1/8
device(config-vlan-12)# tagged ethernet 1/1/23 to 1/1/24
device(config-vlan-12)# source-guard enable ethernet 1/1/23

The following example configures IPSG on all ports on a VLAN. 

device# configure terminal
device(config)# vlan 12
device(config-vlan-12)# untagged ethernet 1/1/5 to 1/1/8
device(config-vlan-12)# tagged ethernet 1/1/23 to 1/1/24
device(config-vlan-12)# source-guard enable

The following example configures IPSG on a LAG interface on a VLAN. 

device# configure terminal
device(config)# vlan 12
device(config-vlan-12)# untagged ethernet 1/1/5 to 1/1/8
device(config-vlan-12)# tagged ethernet 1/1/23 to 1/1/24
device(config-vlan-12)# source-guard enable lag 1
Parent topic: IP Source Guard