Displaying Openflow show
The
show OpenFlow command displays the OpenFlow configuration. It includes the configured unprotected
VLANs as well.
device(config)# show openflow
Administrative Status: Enabled SSL Status: Enabled Controller Type: OFV 100 Number of Controllers: 1 Controller 1: Connection Mode: passive, TCP, Listening Address: 0.0.0.0 Connection Port: 6633 Connection Status: TCP_LISTENING Match Capability: L2 : Port, Source MAC, Destination MAC, Ether type, Vlan, Vlan PCP L3 : Port, Vlan, Vlan PCP, Ethertype(IP,ARP,LLDP), Source IP, Destination IP, IP Protocol, IP TOS, IP Src Port, IP Dst Port L23: All Normal Openflow Enabled Ports: Openflow Hybrid Interfaces: e1/1 Protected VLANs : None Unprotected VLANs : 2, 3, 4, 5, 6, 7, 8, 9, 10, 11 ...................................................... ...................................................... 3994, 3995, 3996, 3997, 3998, 3999, 4000, 4001, 4011, e2/1 Protected VLANs : None Unprotected VLANs : 4010, Default action: drop Maximum number of flows allowed: 65536 Active flow: 0 Maximum number of Protected Vlans allowed: 2048 Maximum number of Unprotected Vlans allowed: 4096 Total number of Unprotected Vlans: 4002