Displaying OpenFlow configuration

The show openflow command displays the OpenFlow configuration.

device(config)# show openflow
Number of Controllers:       2
Controller 1:
Connection Mode:       passive, TCP, 
Listening Address:     0.0.0.0
Connection Port:       6633
Connection Status:       
SSL Connection       :False
No TCP connection found.
Controller 2:
Connection Mode:       active, TCP, 
Controller Address:     10.20.101.199
Connection Port:       23
Connection Status:       
Local IP address:port <-> Remote IP address:port TCP state    RcvQue  RxBuffe SendQue TxBuffe
10.20.178.73    8807      10.20.101.199   23     ESTABLISHED  0       0       0       0      
SSL Connection       :False                                       
Match Capabilty: 
L2: Port, Source MAC, Destination MAC, Ether type, Vlan, Vlan PCP
L3: Port, Vlan, Vlan PCP, Source IP, Destination IP, IP Protocol, IP TOS, IP Src Port, IP Dst Port
Normal Openflow Enabled Ports:      e2/1 
Hybrid Mode ports       Protected Vlan-IDs
e4/1                    (100,101,102,103)
e7/2                    (200)
Default action: drop
Maximum number of flows allowed: 4096
Maximum number of Protected Vlans allowed: 2048