Resolving Module 3 Mismatches

When an expansion module is replaced, it can result in a mismatch with the switch configuration for the previous module. For example, if a 4x10 GbE module is replaced with a 1x100 GbE module, there may be an existing configuration for port x/2/4 that no longer applies to the new module. When these configuration mismatches occur, action must be taken to resolve the mismatch.

The procedures to resolve a Module 3 mismatch in a standalone RUCKUS ICX 7550 switch and a mismatch in a RUCKUS ICX 7550 stack are different.

In this section:

  1. Resolving Module 3 Mismatches in a Standalone RUCKUS ICX 7550 Switch
  2. Resolving Module 3 Mismatches in a RUCKUS ICX 7550 Stack
    When a RUCKUS ICX 7550 stack unit rejoins a stack with a different module type installed as Module 3, a configuration mismatch occurs, and the active controller places the stack unit in non-operational mode.
Parent topic: Expansion Modules