Switch Management

• 1 Switch Management
  • 1.1 Supported ICX Models
  • 1.2 Overview of ICX Switch Management
  • 1.3 ICX Switch Behavior with SmartZone
    • 1.3.1 Data Synching on the Switch Table
    • 1.3.2 Preparing Stacking Devices to Connect to SmartZone
    • 1.3.3 Configuring the ICX Source Address to Be Used by SmartZone
    • 1.3.4 Configuring a Custom Port Number for Connection to SmartZone
  • 1.4 Connecting the ICX to the SmartZone Controller
    • 1.4.1 Setting Up Switch Registrar Discovery
    • 1.4.2 Configuring DHCP to Provide SmartZone IP Addresses to an ICX Switch
    • 1.4.3 Manually Configuring the SmartZone IP Address on an ICX Switch
  • 1.5 Approving and Registering switches
    • 1.5.1 ICX Pre-Provisioning into SmartZone
      • 1.5.1.1 Pre-Provisioning Switches in the Controller
    • 1.5.2 Creating Switch Registration Rules
    • 1.5.3 Approving Switches
    • 1.5.4 Moving the Switches between Groups
    • 1.5.5 Deleting Switches
    • 1.5.6 Switching Over Clusters
    • 1.5.7 Rehoming Switches
  • 1.6 ICX to SmartZone Connection Status
    • 1.6.1 Displaying the SmartZone Connection Status
    • 1.6.2 Disconnecting the ICX Switch from SmartZone
    • 1.6.3 Disabling SmartZone Management on the ICX Switch
  • 1.7 Switch Configuration
  • 1.8 Configuring the Switches
    • 1.8.1 Switch Groups
      • 1.8.1.1 Creating Switch Groups
      • 1.8.1.2 Group Level Configuration
      • 1.8.1.3 Port Level Configuration
        • 1.8.1.3.1 Selective QinQ
          • 1.8.1.3.1.1 Configuring Selective QinQ
        • 1.8.1.3.2 Support of Breakout Ports on an ICX Switch
          • 1.8.1.3.2.1 Enabling Switch Breakout Ports
          • 1.8.1.3.2.2 Disabling Breakout Ports on the Controller
      • 1.8.1.4 Switch Level Configuration
        • 1.8.1.4.1 Creating Switch Level Configuration
        • 1.8.1.4.2 Copying Configuration
        • 1.8.1.4.3 QoS SGT
          • 1.8.1.4.3.1 Configuring QoS SGT
    • 1.8.2 BGP EVPN
      • 1.8.2.1 BGP EVPN Multihoming Overview
      • 1.8.2.2 BGP EVPN Multihoming (Dual Homing) Network Topology
      • 1.8.2.3 Creating a BGP EVPN Route Reflector Profile
      • 1.8.2.4 Creating a BGP EVPN Full Mesh Profile
      • 1.8.2.5 Managing BGP EVPN Profiles
      • 1.8.2.6 Monitoring ICX Fabric Information
    • 1.8.3 Creating Authentication Profiles
    • 1.8.4 Configuring Switch AAA Servers
    • 1.8.5 Configuring Switch AAA Settings
    • 1.8.6 Creating Routing Configurations
    • 1.8.7 Copying Switch Group Configuration
    • 1.8.8 Group Level CLI Configuration
    • 1.8.9 Copy Config as Template
      • 1.8.9.1 Creating a CLI Template from an Existing Switch Backup Configuration
    • 1.8.10 Zero Touch Provisioning using Group level Configuration
    • 1.8.11 Model-Based Configurations
    • 1.8.12 Creating a Common Configuration
    • 1.8.13 Port Settings
      • 1.8.13.1 Creating and Managing Port Templates
      • 1.8.13.2 Port MAC Security
        • 1.8.13.2.1 Configuring Port MAC Security
      • 1.8.13.3 Configuring Port Settings for a Switch
      • 1.8.13.4 Editing Ports Across Multiple Switches
      • 1.8.13.5 Managing Link Aggregation Groups (LAGs)
    • 1.8.14 Creating a Switch Stack
      • 1.8.14.1 Ability to Convert Standalone Switch to Stack
      • 1.8.14.2 Viewing Stack Port Details
    • 1.8.15 Accessing the Switch CLI through Controller (Remote CLI)
    • 1.8.16 Backing up and Restoring Switch Configuration
      • 1.8.16.1 Creating Config Backup for Switch Group
      • 1.8.16.2 Viewing Configuration Alerts
    • 1.8.17 Viewing Switch Information
      • 1.8.17.1 Initiated By
        • 1.8.17.1.1 Viewing the Configuration History of Switches
  • 1.9 Firmware Upgrade
    • 1.9.1 Uploading the Switch Firmware to the Controller
    • 1.9.2 Configuring the Group Firmware Settings
    • 1.9.3 Scheduling a Firmware Upgrade for Switch Group
    • 1.9.4 Scheduling a Firmware Upgrade for Selected Switches
    • 1.9.5 Deleting the Firmware Upgrade Schedules
  • 1.10 Monitoring Switch Status
    • 1.10.1 Viewing Switch Health
    • 1.10.2 Viewing Alarms
    • 1.10.3 Viewing the Events
    • 1.10.4 Viewing LLDP Neighbor Information
    • 1.10.5 Viewing Traffic Trends in the Switch
    • 1.10.6 Viewing Firmware History of the Switch
    • 1.10.7 Viewing PoE Utilization and Health Status of the Switch
    • 1.10.8 Viewing Switches on the Dashboard
    • 1.10.9 Improving Switch Configuration Change Management
  • 1.11 Switch Clients
    • 1.11.1 Switch Clients