RUCKUS Radio MIBs

  • Parent node: ruckusRadioInfo
  • OID: .1.3.6.1.4.1.25053.1.1.12.1.1.1

Node Name

OID

Description

Access Permission
ruckusRadioInfo .1.3.6.1.4.1.25053.1.1.12.1.1.1.1 Shows the number of radios present on this system. Read only
ruckusRadioTable .1.3.6.1.4.1.25053.1.1.12.1.1.1.2 Shows the radio table. Not accessible
ruckusRadioEntry .1.3.6.1.4.1.25053.1.1.12.1.1.1.2.1 Specifies each radio entry. Not accessible
ruckusRadioMode .1.3.6.1.4.1.25053.1.1.12.1.1.1.2.1.1 Specifies the radio mode. Read-Write
ruckusRadioCountry .1.3.6.1.4.1.25053.1.1.12.1.1.1.2.1.2 Specifies the country code. Read-Write
ruckusRadioBSSType .1.3.6.1.4.1.25053.1.1.12.1.1.1.2.1.3 Specifies the BSS type. Read only
ruckusRadioChannel .1.3.6.1.4.1.25053.1.1.12.1.1.1.2.1.4 Specifies the current operating channel. If it’s set to 0, the system will automatically choose the most optimal channel. Read-Write
ruckusRadioDataRate .1.3.6.1.4.1.25053.1.1.12.1.1.1.2.1.5

This defines the transmission rate of the radio. The available rates are as follows:

IEEE 802.11a/802.11g radios:

  • Auto, 1Mb, 2Mb, 5.5Mb, 11Mb, 6Mb, 9Mb, 12Mb, 18Mb, 24Mb, 36Mb, 48Mb, 54Mb.

For 11ng/11na:

  • Auto, 1Mb, 2Mb, 5.5Mb, 11Mb, 6Mb, 9Mb, 12Mb, 18Mb, 24Mb, 36Mb, 48Mb, 54Mb, 6.5Mb, 13Mb, 19.5Mb, 26Mb, 39Mb, 52Mb, 58.5Mb, 65Mb, 78Mb, 104Mb, 117Mb, 130Mb, 13.5Mb, 27.5Mb, 40.5Mb, 81.5Mb, 108Mb, 121.5Mb, 135Mb, 27Mb, 81Mb, 162Mb, 162MB, 216Mb, 243Mb, 270Mb.
Note: IEEE 802.11ng refers to 802.11n radios operating in the 2.4-GHz band. IEEE 802.11na refers to 802.11n radios operating in the 5-GHz band
 Read only
ruckusRadioTxPower .1.3.6.1.4.1.25053.1.1.12.1.1.1.2.1.6 Specifies the transmit power of radio. Read-Write
ruckusRadioProtectionMode .1.3.6.1.4.1.25053.1.1.12.1.1.1.2.1.7

This setting is activated when both IEEE 802.11g and 802.11b supported clients are present on the same network.

  • None: No protection is used.
  • ctsOnly: The Access Point (AP) will dispatch a Clear to Send (CTS) frame before transmitting IEEE 802.11g frames. This CTS frame will quiet down the IEEE 802.11b clients.
  • rtsCts: It necessitates that a Request to Send (RTS) be transmitted by the sender of the IEEE 802.11g frame, and the responder to dispatch a CTS prior to any IEEE 802.11g frames being transmitted.
 Read-Write
ruckusRadioNoiseFloor .1.3.6.1.4.1.25053.1.1.12.1.1.1.2.1.8 Specifies the noise floor of radio. Read only
ruckusRadioIndex .1.3.6.1.4.1.25053.1.1.12.1.1.1.2.1.200 Shows the radio index. Read only

  • Parent node: ruckusRadioStatsTable
  • OID: .1.3.6.1.4.1.25053.1.1.12.1.1.1.3

Node Name

OID

Description

Access Permission
ruckusRadioStatsEntry .1.3.6.1.4.1.25053.1.1.12.1.1.1.3.1 Specifies the radio statistics entry. Not accessible
ruckusRadioStatsMaxSta .1.3.6.1.4.1.25053.1.1.12.1.1.1.3.1.1 Shows the maximum stations allowed. Read only
ruckusRadioStatsNumSta .1.3.6.1.4.1.25053.1.1.12.1.1.1.3.1.2 Shows the number of associated stations. Read only
ruckusRadioStatsNumAuthSta .1.3.6.1.4.1.25053.1.1.12.1.1.1.3.1.3 Shows the number of authenticated stations. Read only
ruckusRadioStatsNumAuthReq .1.3.6.1.4.1.25053.1.1.12.1.1.1.3.1.4 Shows the number of authentication requests. Read only
ruckusRadioStatsNumAuthResp .1.3.6.1.4.1.25053.1.1.12.1.1.1.3.1.5 Shows the number of authentication responses. Read only
ruckusRadioStatsNumAuthSuccess .1.3.6.1.4.1.25053.1.1.12.1.1.1.3.1.6 Shows the number of successful authentications. Read only
ruckusRadioStatsNumAuthFail .1.3.6.1.4.1.25053.1.1.12.1.1.1.3.1.7 Shows the number of authentication failures. Read only
ruckusRadioStatsNumAssocReq .1.3.6.1.4.1.25053.1.1.12.1.1.1.3.1.8 Shows the number of association requests. Read only
ruckusRadioStatsNumAssocResp .1.3.6.1.4.1.25053.1.1.12.1.1.1.3.1.9 Shows the number of association responses. Read only
ruckusRadioStatsNumAssocSuccess .1.3.6.1.4.1.25053.1.1.12.1.1.1.3.1.10 Shows the number of successful associations. Read only
ruckusRadioStatsNumAssocFail .1.3.6.1.4.1.25053.1.1.12.1.1.1.3.1.11 Shows the number of association failures. Read only
ruckusRadioStatsAssocFailRate .1.3.6.1.4.1.25053.1.1.12.1.1.1.3.1.12 Shows the number of association failures. Read only
ruckusRadioStatsAuthFailRate .1.3.6.1.4.1.25053.1.1.12.1.1.1.3.1.13 Shows the station authentication fail rate from ruckusRadioStatsNumAuthFail or ruckusRadioStatsNumAuthReq. Read only
ruckusRadioStatsAssocSuccessRate .1.3.6.1.4.1.25053.1.1.12.1.1.1.3.1.14 Shows the station association success rate from ruckusRadioStatsNumAssocSuccess or ruckusRadioStatsNumAssocReq. Read only
ruckusRadioStatsResourceUtil .1.3.6.1.4.1.25053.1.1.12.1.1.1.3.1.15 Shows the wireless resource utilization rate from ruckusRadioStatsNumSta or ruckusRadioStatsMaxSta. Read only
ruckusRadioStatsRxBytes .1.3.6.1.4.1.25053.1.1.12.1.1.1.3.1.16 Shows the data frames received, in bytes. Read only
ruckusRadioStatsRxFrames .1.3.6.1.4.1.25053.1.1.12.1.1.1.3.1.17 Shows the number of received frames. Read only
ruckusRadioStatsRxWEPFail .1.3.6.1.4.1.25053.1.1.12.1.1.1.3.1.18 Shows the number failed WEP frames that were received. Read only
ruckusRadioStatsRxDecryptCRCError .1.3.6.1.4.1.25053.1.1.12.1.1.1.3.1.19 This displays the number of received frames that have a decrypted Cyclic Redundancy Check (CRC) error. Read only
ruckusRadioStatsRxMICError .1.3.6.1.4.1.25053.1.1.12.1.1.1.3.1.20 This displays the number of received frames that have a Message Integrity Check (MIC) error. Read only
ruckusRadioStatsRxErrors .1.3.6.1.4.1.25053.1.1.12.1.1.1.3.1.21 This displays the number of error frames that have been received. Read only
ruckusRadioStatsTxBytes .1.3.6.1.4.1.25053.1.1.12.1.1.1.3.1.22 This displays the number of transmitted bytes that have been received. Read only
ruckusRadioStatsTxFrames .1.3.6.1.4.1.25053.1.1.12.1.1.1.3.1.23 Shows the number of transmitted frames. Read only
ruckusRadioStatsTotalAssocTime .1.3.6.1.4.1.25053.1.1.12.1.1.1.3.1.42 Shows the total association time of a client. Read only
ruckusRadioStatsTotalAirtime .1.3.6.1.4.1.25053.1.1.12.1.1.1.3.1.50 Shows the total airtime. Read only
ruckusRadioStatsBusyAirtime .1.3.6.1.4.1.25053.1.1.12.1.1.1.3.1.51 Shows the busy airtime. Read only
ruckusRadioStatsTxAirtime .1.3.6.1.4.1.25053.1.1.12.1.1.1.3.1.52 Shows the Tx airtime. Read only
ruckusRadioStatsRxAirtime .1.3.6.1.4.1.25053.1.1.12.1.1.1.3.1.53 Shows the Rx airtime. Read only
ruckusRadioStatsIndex .1.3.6.1.4.1.25053.1.1.12.1.1.1.3.1.200 Shows the radio statistical index. Read only
Parent topic: RUCKUS AP MIBs