| ruckusAdapterEntry |
.1.3.6.1.4.1.25053.1.1.9.1.1.1.1.1 |
Specifies each adapter entry. |
Not accessible |
| ruckusAdapterMacAddress |
.1.3.6.1.4.1.25053.1.1.9.1.1.1.1.1.1 |
Specifies adapter hardware address. It serves as an index in the
table. |
Not accessible |
| ruckusAdapterReboot |
.1.3.6.1.4.1.25053.1.1.9.1.1.1.1.1.2 |
Setting this to ‘true(1)’ will trigger a reboot of the adapter.
However, it always returns ‘false(2)’. |
Read, write |
| ruckusAdapterInfoTable |
.1.3.6.1.4.1.25053.1.1.9.1.1.1.2 |
Specifies each adapter table. |
Not accessible |
| ruckusAdapterInfoEntry |
.1.3.6.1.4.1.25053.1.1.9.1.1.1.2.1 |
Specifies each adapter entry. |
Not accessible |
| ruckusAdapterInfoMacAddr |
.1.3.6.1.4.1.25053.1.1.9.1.1.1.2.1.1 |
Shows the adapter MAC address, and serves as an index in the
table. |
Not accessible |
| ruckusAdapterInfoSSID |
.1.3.6.1.4.1.25053.1.1.9.1.1.1.2.1.2 |
Specifies the SSID |
Read only |
| ruckusAdapterInfoBSSID |
.1.3.6.1.4.1.25053.1.1.9.1.1.1.2.1.3 |
Specifies the BSS ID. |
Read only |
| ruckusAdapterRssi |
.1.3.6.1.4.1.25053.1.1.9.1.1.1.2.1.4 |
Specifies the RSSI. |
Read only |
| ruckusAdapterStatTable |
.1.3.6.1.4.1.25053.1.1.9.1.1.1.3 |
Specifies the adapter table. |
Not accessible |
| ruckusAdapterStatEntry |
.1.3.6.1.4.1.25053.1.1.9.1.1.1.3.1 |
Specifies each adapter entry. |
Not accessible |
| ruckusAdapterStatMacAddr |
.1.3.6.1.4.1.25053.1.1.9.1.1.1.3.1.1 |
Shows the adapter MAC address, and serves as an index in the
table. |
Not accessible |
| ruckusAdapterStatRxDataFrames |
.1.3.6.1.4.1.25053.1.1.9.1.1.1.3.1.2 |
Shows the Rx data frames. |
Read only |
| ruckusAdapterStatRxMgmtFrames |
.1.3.6.1.4.1.25053.1.1.9.1.1.1.3.1.3 |
Shows the Rx management frames. |
Read only |
| ruckusAdapterStatRxCtrlFrames |
.1.3.6.1.4.1.25053.1.1.9.1.1.1.3.1.4 |
Shows the Rx control frames. |
Read only |
| ruckusAdapterStatRxUcastFrames |
.1.3.6.1.4.1.25053.1.1.9.1.1.1.3.1.5 |
Shows the Rx unicast frames. |
Read only |
| ruckusAdapterStatRxMcastFrames |
.1.3.6.1.4.1.25053.1.1.9.1.1.1.3.1.6 |
Shows the Rx multicast or broadcast frames. |
Read only |
| ruckusAdapterStatRxBytes |
.1.3.6.1.4.1.25053.1.1.9.1.1.1.3.1.7 |
Shows the Rx data count, in bytes. |
Read only |
| ruckusAdapterStatRxDup |
.1.3.6.1.4.1.25053.1.1.9.1.1.1.3.1.8 |
This displays instances where received data has been discarded due to
duplicates. |
Read only |
| ruckusAdapterStatRxNoPrivacy |
.1.3.6.1.4.1.25053.1.1.9.1.1.1.3.1.9 |
This displays the received data with WEP (Wired Equivalent Privacy)
enabled, but with privacy turned off. |
Read only |
| ruckusAdapterStatRxWEPFail |
.1.3.6.1.4.1.25053.1.1.9.1.1.1.3.1.10 |
This displays instances where the processing of received WEP (Wired
Equivalent Privacy) data has failed. |
Read only |
| ruckusAdapterStatRxDemicFail |
.1.3.6.1.4.1.25053.1.1.9.1.1.1.3.1.11 |
This indicates that the reception (Rx) demodulation and integrity
check (demic) has failed. |
Read only |
| ruckusAdapterStatRxDecap |
.1.3.6.1.4.1.25053.1.1.9.1.1.1.3.1.12 |
This indicates that the reception (Rx) decapsulation process was
unsuccessful. |
Read only |
| ruckusAdapterStatRxDeFrag |
.1.3.6.1.4.1.25053.1.1.9.1.1.1.3.1.13 |
This indicates that the reception (Rx) defragmentation process was
unsuccessful. |
Read only |
| ruckusAdapterStatRxDisAssoc |
.1.3.6.1.4.1.25053.1.1.9.1.1.1.3.1.14 |
This indicates that the reception (Rx) disassociations. |
Read only |
| ruckusAdapterStatRxDeAuth |
.1.3.6.1.4.1.25053.1.1.9.1.1.1.3.1.15 |
This indicates that the reception (Rx) Rx deauthentication. |
Read only |
| ruckusAdapterStatRxUnAuth |
.1.3.6.1.4.1.25053.1.1.9.1.1.1.3.1.16 |
This indicates that data received (Rx) is unauthenticated. |
Read only |
| ruckusAdapterStatRxUnEncrypted |
.1.3.6.1.4.1.25053.1.1.9.1.1.1.3.1.17 |
Shows the unencrypted Rx data. |
Read only |
| ruckusAdapterStatRxBeacons |
.1.3.6.1.4.1.25053.1.1.9.1.1.1.3.1.18 |
Shows the Rx beacons. |
Read only |
| ruckusAdapterStatTxDataFrames |
.1.3.6.1.4.1.25053.1.1.9.1.1.1.3.1.19 |
Shows the Rx data frames. |
Read only |
| ruckusAdapterStatTxMgmtFrames |
.1.3.6.1.4.1.25053.1.1.9.1.1.1.3.1.20 |
Shows the transmitted (Tx) management frames. |
Read only |
| ruckusAdapterStatTxUcastFrames |
.1.3.6.1.4.1.25053.1.1.9.1.1.1.3.1.21 |
Shows the Tx unicast frames. |
Read only |
| ruckusAdapterStatTxMcastFrames |
.1.3.6.1.4.1.25053.1.1.9.1.1.1.3.1.22 |
Shows the Tx multicast. |
Read only |
| ruckusAdapterStatTxBytes |
.1.3.6.1.4.1.25053.1.1.9.1.1.1.3.1.23 |
Shows the Tx data count, in bytes. |
Read only |
| ruckusAdapterStatTxAssoc |
.1.3.6.1.4.1.25053.1.1.9.1.1.1.3.1.24 |
Shows the [re]associations. |
Read only |
| ruckusAdapterStatTxAssocFail |
.1.3.6.1.4.1.25053.1.1.9.1.1.1.3.1.25 |
Shows the [re]association failures. |
Read only |
| ruckusAdapterStatTxAuth |
.1.3.6.1.4.1.25053.1.1.9.1.1.1.3.1.26 |
Shows the [re]authentications. |
Read only |
| ruckusAdapterStatTxAuthFail |
.1.3.6.1.4.1.25053.1.1.9.1.1.1.3.1.27 |
Shows the [re]authentication failures. |
Read only |
| ruckusAdapterStatTxDeAuth |
.1.3.6.1.4.1.25053.1.1.9.1.1.1.3.1.28 |
Shows the Tx de auth. |
Read only |
| ruckusAdapterStatTxDisAssoc |
.1.3.6.1.4.1.25053.1.1.9.1.1.1.3.1.29 |
Shows the Tx dis associations. |
Read only |
| ruckusAdapterStatTxProbeReq |
.1.3.6.1.4.1.25053.1.1.9.1.1.1.3.1.30 |
Shows the Tx probe requests. |
Read only |
| ruckusAdapterStatTxProbeResp |
.1.3.6.1.4.1.25053.1.1.9.1.1.1.3.1.31 |
Shows the Tx probe responses. |
Read only |