ICX 8200 Stack Configuration Overview
ICX 8200 Stacking Capability
| Stacking Capability | ICX 8200 | Additional Information |
|---|---|---|
| Topologies supported | Ring and linear | Refer to ICX 8200 stacking topologies for more information. |
| Maximum stack size | 12 | Stacking only. |
| Maximum stacking distance |
40 kilometers |
Refer to FastIron stacking distances and optics by device for more information. |
| ICX 8200 model combinations | Allowed (all models) | ICX 8200 models can be combined in the same stack. |
| Stacking ports |
4 X 25 Gbps or 2 X 10 Gbps ICX 8200-C08PF / C08ZP/ C08PFV: ports 1/2/1 to 1/2/2 ICX 8200-24FX: ports 1/2/1 to 1/2/8 All other ICX 8200-24 and ICX 8200-48 models: ports 1/2/1 to 1/2/4 |
Stacking port speeds are auto-detect. |
| Valid-stack-port sets |
ICX 8200-C08PF / C08ZP / C08PFV: (x/2/1, x/2/2, 1) ICX 8200-24 / 24P / 24ZP / 24F / 24PV / 48 / 48F / 48P / 48PF / 48PF2 / 48ZP2: (x/2/1, x/2/3, 2) ICX 8200-24FX: (x/2/1, x/2/3, 2) (x/2/5, x/2/7, 2)
Note: The third
number in the set is the maximum number of ports in a stacking
trunk. The number "1" indicates a single stack-port only.
|
Refer to the definition of valid-stack-port set in Stacking terminology for more information. Refer to ICX 8200 Stacking Topology for port locations. |
| Reconfigurable ports | Use the stack-port
and stack-trunk commands to reconfigure ports. |
Stacking port speeds are auto-detect and cannot be configured. |
| Trunks |
The following maximum stacking trunk configurations are supported: ICX 8200-C08PF/C08PFV/ C08ZP: no stack-trunk ICX 8200-24FX: stack-trunk 1/2/1 to 1/2/2, stack-trunk 1/2/3 to 1/2/4, stack-trunk 1/2/5 to 1/2/6 and stack-trunk 1/2/7 to 1/2/8 All other ICX 8200-24 and ICX 8200-48 models: stack-trunk 1/2/1 to 1/2/4 |
See also "Linear-topology trunks" in this table. |
| Linear-topology trunks | The following maximum linear-topology trunks are
supported: ICX 8200-C08PF / C08ZP / C08PFV: 2-port linear-topology-trunk: stack-trunk x/2/1 to x/2/2 ICX 8200-24FX: 4-port linear-topology-trunk: stack-trunk x/2/1 to x/2/4, stack-trunk x/2/5 to x/2/8 ICX 8200-24 / 24F / 24P / 24ZP / 24PV / 48 / 48F / 48P / 48ZP2 / 48PF / 48PF2: 4-port linear-topology-trunk: stack-trunk x/2/1 to x/2/4 |
Refer to Configuring Two-unit Stack Linear-topology Trunks for more information. |
| Hitless switchover and hitless failover | Supported | Refer to Hitless stacking. |
| License requirements |
All ICX 8200 devices include a license for 10-Gbps or 25-Gbps stacking. |
For more information on ICX 8200 license options, refer to the RUCKUS FastIron Software Licensing Guide. |
| Configuration options | Manual and automatic, including stack interactive-setup and stack zero-touch provisioning | Refer to Stack construction methods. |
| Access methods | TFTP, SCP | Software images, boot images, and signatures can be downloaded to a stack using TFTP and SCP applications. Refer to the RUCKUS FastIron Software Upgrade Guide for more information. |
| Stacking commands | All stacking CLI is supported on ICX 8200 devices unless otherwise stated on the command reference page. |