Stack Management

In this section:

  1. Managing a Stack through One IP Address
  2. Enabling or Disabling Stacking Mode
  3. Controlling the Stack through the CLI
  4. Stack Unit Identification
  5. Naming a Stack Unit
    You can assign names to stack units to help identify them. Stack unit names can be up to 63 characters long. A stack unit name must start with an alpha character and must not contain spaces.
  6. Stack Management MAC Address
  7. Stack Device Roles and Elections
  8. Stack Unit Priority
  9. Stack Software Images
  10. Stack Mismatches
  11. Configuring Stacking Ports or Trunks in a Live System
  12. Configuring Stacking Trunks in a Live Environment
  13. Configuring Stacking Ports in a Live Environment
  14. Handling Stack-Port and Stack-Trunk Mismatches in ICX 8100 and ICX 8200
    When a stack-port is incorrectly connected to a stack-trunk, the system monitors and restores port status once the mismatch is resolved—either through configuration changes or physical disconnection.
  15. Adding, Removing, or Replacing Units in a Stack
  16. Reloading a Stack Unit
  17. Managing Stack Partitioning
  18. Merging Stacks
  19. Unconfiguring a Stack
  20. Syslog, SNMP, and Traps for Stack Units
  21. Displaying Stack Information
  22. MIB Support for ICX Stack Configurations