New in this Document
The following table provides a description of new information added to this guide for FastIron 10.0.10 releases.
Summary of Enhancements in FastIron Release 10.0.10j
|
Feature |
Description |
Reference |
|---|---|---|
| Support for RUCKUS ICX8200-24XP2 and ICX8200-48NP2 | FastIron release 10.0.10j adds stacking support for ICX8200-24XP2 and ICX8200-48NP2 | All chapters. |
Summary of Enhancements in FastIron Release 10.0.10h
|
Feature |
Description |
Reference |
|---|---|---|
| Support for Port Dampening (Stack Ports) | Link dampening is now enabled by default on stacking ports whenever stacking is configured and the stack is enabled. This enhancement suppresses transient micro‑flap events on stacking links, ensuring that only genuine and sustained link state changes are passed to the stacking control plane. As a result, unnecessary stack elections and control‑plane churn caused by brief cable or PHY disturbances are reduced, improving overall stack stability without requiring any user configuration. | Port Dampening (Stack Ports) |
| Support for ICX 8100 models | FastIron release 10.0.10h adds stacking support for ICX8100-C08PF-X, ICX8100-C16P-X, ICX8100-24-X, ICX8100-24P-X, ICX8100-48-X, ICX8100-48P-X, and ICX8100-48PF-X models. | ICX 8100 Stack Configuration Overview. |
| Stacking and Uplinks Limitation | Stacking and uplinks are not supported with the 5‑meter passive cable on the ICX 7150 devices and a 3‑meter passive cable does not support cross‑connection stacking on the ICX 7150 devices. | FastIron Stacking Ports and Bandwidth. |
Summary of Enhancements in FastIron Release 10.0.10f
|
Feature |
Description |
Reference |
|---|---|---|
| Converting from Stacking to Data Uplink on ICX 8200 Module 2 |
On ICX 8200 devices, unused stacking ports can be repurposed as data ports. When an ICX 8200 stacking module is not configured for stacking, its designated stacking ports can be used as data ports. |
Converting from Stacking to Data Uplink on ICX 8200 Module 2. |
| Support for ICX 7150 models | FastIron release 10.0.10f adds support for other ICX 7150 models. | ICX 7150 Stack Configuration Overview. |
| Change in Maximum Stack ID Limit for ICX 7150 devices | The maximum number of units in an ICX 7150 stack has been reduced from 12 (in FastIron 8.0.9x release) to 8 (in FastIron 10.0.10f). | ICX 7150 Stack Configuration Overview. |
Summary of Enhancements in FastIron Release 10.0.10d
Summary of Enhancements in FastIron Release 10.0.10
|
Feature |
Description |
Location |
|---|---|---|
| RUCKUS ICX 8200 | New: Support for additional RUCKUS ICX 8200 model: ICX 8200-24FX, ICX 8200-24F, ICX 8200-24ZP, ICX 8200-48ZP2, ICX 8200-48F, and ICX 8200-C08ZP. | ICX 8200 Stack Configuration Overview. |
| Updates to address defects | Updated: Minor updates have been introduced throughout the guide to address defects. | All chapters. |
| Minor editorial updates | Updated: Minor editorial updates were made throughout the guide. | All chapters. |