RESTCONF Supported Modules

The following features are targeted for this release, only a subset of the equivalent CLIs for each feature will be supported.

Note: For the initial release of RESTCONF for ICX these are the features supported and even for these features not all functionality is supported.

ICX Feature Openconfig Model
ICX Feature Openconfig Model
Interface/Port Config/Operational state
Vlan Config
VE Config
LAG Config
POE Config
LLDP Config
Static Route Config
OSPF Config
ACL Config
AAA Config
Username / Passwords Config
DNS Config
IGMP Snooping Config
Protected Port Config
MAC Address Table (Static and Dynamic) Config
BPDU Guard Config
Spanning Tree Admin-edge Port Config
STP Config
Flexauth Config
DHCPv4 Snoop Config
DHCPv6 Snoop Config
DAI Config
NDI Config
IPSG Config
IPv6SG Config
Storm Control Config
IPPM Profile Config
IPPM ICMP-Echo Configuration Config
Destination and Source IP address for IPPM ICMP-Echo Config
RTT Minimum and RTT Maximum Configuration Config
Jitter Maximum Config
Probe Count Config
Virtual Routing and Forwarding Config
Schedule Config
Watcher Configuration Config
Slot Profile Config
Breakout Port Config
Web Authentication Config
VXLAN and VTEP Config