Displaying RESTCONF Configuration and Status Information

You can use the following show commands to display information about the RESTCONF configuration and status. All of the commands are optional and do not need to be entered in the specified order.

Enter the show restconf config command to show which RESTCONF parameters are configured.
```
device> show restconf config
RESTConf Feature Configuration
restconf enable
protocol-debug-level error
platform-debug-level info
config-sync enabled
config-sync-timeout 5 mins
```
Note: RESTCONF maintains own database for fast processing. When database sync is happening from FastIron to RESTCONF, the show commands and configuration commands to RESTCONF module result in failure due to ITC timeout. The following message is displayed during the failure instances.
```
device# show restconf config
Restconf DB sync is in-progress, try after sometime
```

Enter the show restconf event-counters command to display information about RESTCONF event counters.

device> show restconf event-counters
SCP Event  |Processed    |YANG Map    |Queued    |Duplicate    |Unknown Oper    |
153        |1            |1           |1         |0            |0               |
154        |0            |2           |0         |0            |0               |
155        |0            |3           |0         |0            |0               |
131        |2            |4           |1         |1            |0               |
143        |1            |5           |1         |0            |0               |
144        |0            |6           |0         |0            |0               |
161        |0            |9           |0         |0            |0               |
           |             |10          |0         |0            |0               |
140        |0            |8           |0         |0            |0               |
           |             |7           |0         |0            |0               |
141        |0            |11          |0         |0            |0               |
145        |0            |12          |0         |0            |0               |
146        |0            |13          |0         |0            |0               |
147        |0            |14          |0         |0            |0               |
148        |0            |15          |0         |0            |0               |
149        |0            |16          |0         |0            |0               |
156        |0            |17          |0         |0            |0               |
157        |0            |18          |0         |0            |0               |
158        |0            |19          |0         |0            |0               |
150        |0            |20          |0         |0            |0               |
8          |0            |21          |0         |0            |0               |
81         |0            |22          |0         |0            |0               |
65535      |0            |0           |0         |0            |0               |

Enter the show restconf event-map command to display RESTCONF event-mapping information.

device> show restconf event-map
SCP Event             YANG ID             YANG Mapping
153                     1                 /system/aaa/authentication/users
154                     2                 /system/aaa/server-groups/server-group/tacacs-group/servers/server/tacacs
155                     3                 /system/aaa/authentication/config/authentication-method
131                     4                 /system/dns
143                     5                 /lldp/config
144                     6                 /lldp/interfaces
161                     9                 /interfaces/interface/#wc/aggregation
                        10                /interfaces/interface/#wc/ethernet/config/aggregate-id
140                     8                 /interfaces/interface/#wc/ethernet/switched-vlan/config
                        7                 /network-instances/network-instance/#wc/vlans
141                     11                /openconfig-spanning-tree:stp
145                     12                /network-instances/network-instance/#wc/protocols/protocol/OSPF/#wc
146                     13                /network-instances/network-instance/#wc/protocols/protocol/OSPF/#wc/ospfv2/areas
147                     14                /network-instances/network-instance/#wc/protocols/protocol/OSPF/#wc/ospfv2/areas/
area/#wc/interfaces
148                     15                /network-instances/network-instance/#wc/protocols/protocol/OSPF/#wc/ospfv2/areas/
area/#wc/interfaces
149                     16                /network-instances/network-instance/#wc/protocols/protocol/STATIC/#wc/staticroutes
156                     17                /system/aaa/server-groups/server-group/radius-group/servers/server/radius
157                     18                /system/aaa/authentication/icx-openconfig-aaa-aug:dot1x
158                     19                /system/aaa/authorization/icx-openconfig-aaa-aug:coa/openconfig
interfaces:interfaces
150                     20                /openconfig-acl:acl
8                       21                (null)
81                      22                (null)

Enter the show restconf running-config command to display RESTCONF running configuration information.

device> show restconf running-config

Get RC Req : File /var/log/restconf/ui_config.xml, XPath /, Def 0 State 0

RESTConf Running Configuration XML File : /var/log/restconf/ui_config.xml
<?xml version="1.0" encoding="UTF-8"?>
<config xmlns="http://yumaworks.com/ns/yumaworks-db-api">
  <interfaces xmlns="http://openconfig.net/yang/interfaces">
    <interface>
      <config>
        <description/>  
        <enabled>true</enabled>
        <name>ethernet 1/1/1</name>   
        <type>ianaift:ethernetCsmacd</type>
     </config>
     <ethernet xmlns="http://openconfig.net/yang/interfaces/ethernet">   
       <config>
         <auto-negotiate>false</auto-negotiate>
         <duplex-mode>FULL</duplex-mode>
         <ethernet-clock xmlns="http://commscope.com/ns/yang/icx/icx-openconfig-if-ethernet
aug">none</ethernet-clock>
           <port-speed>oc-eth:SPEED_1GB</port-speed>
        </config>
      </ethernet>
      <name>ethernet 1/1/1</name>  
    </interface>
…  
  </interfaces>
  <lldp xmlns="http://openconfig.net/yang/lldp">
    <config>
     <enabled>true</enabled>
    </config>
    <interfaces>
      <interface>
        <config>
          <enabled>true</enabled>
          <name>ethernet 1/1/1</name>
        </config>
        <name>ethernet 1/1/1</name>
      </interface>

Enter the show restconf status command to display the RESTCONF status information.

device> show restconf status
RESTConf Status
YControl Interface Init      : 1
YControl Showdown            : 0
DB-API Service Down          : 0
YControl Init Fail           : 0
DB-API Service Init Fail     : 0
Netconfd Debug Edit Fail     : 0
RESTConf Config Edit Fail    : 513
RESTConf Config Delete Fail  : 10
RESTConf Get Config Fail     : 0
RESTConf Edit Debug Pass     : 1
RESTConf Edit Config Pass    : 315
RESTConf Delete Config Pass  : 2
RESTConf Get Config Pass     : 0
RESTConf Invalid Operation   : 0
Invalid File Request         : 0
Config Sync Pass             : 1
Config Sync Fail             : 0
Config Sync Timer Start      : 1
Config Sync Timer Cancel     : 0
Config Sync Timer Expire     : 1
Event Timer Start            : 0
Event Timer Cancel           : 0
Event Timer Expire           : 0
Config Sync Timer Status     : Disabled
Event Timer Status           : Disabled
.....................................