Enabling Priority Flow Control Globally

Follow these steps to enable PFC globally.

Note: PFC is supported only on RUCKUS ICX 7550 and ICX 7850 devices.

  1. Enter global configuration mode. 
    device# configure terminal
  2. Enable PFC globally. 
    device(config)# priority-flow-control enable
  3. Return to privileged EXEC mode. 
    device(config)# exit
  4. Verify the configuration. 
    device# show priority-flow-control
Global PFC Status: Enabled
PFC Disabled on PG0
PFC Disabled on PG1
PFC Enabled on PG2
PFC Disabled on PG3
  5. Save the configuration. 
    device# write memory

Enable Priority Flow Control Globally Configuration Example

device# configure terminal
device(config)# priority-flow-control enable
device(config)# exit
device# show priority-flow-control
device# write memory
Parent topic: Configuring QoS