Configuring DSCP and CoS Marking for the Self-Generated Packets

For ICX 8100 and ICX 8200 devices, follow these steps to configure DSCP and CoS remarking for self-generated packets.
  1. Enter global configuration mode.
    device# configure terminal
  2. Configure the IEEE 802.1p priority marking for SSH traffic
    device(config)# ip self-generate-traffic ssh 802-1p-priority-marking 5
  3. Configure the DSCP marking for SSH traffic
    device(config)# ip self-generate-traffic ssh dscp-marking 45
  4. Configure additional options for the self-generated packets.
    device(config)#ip self-generate-traffic 
  all         Change DSCP marking for all
  dns         Change DSCP marking for DNS
  icmp        Change DSCP marking for ICMP
  ntp         Change DSCP marking for NTP
  radius      Change DSCP marking for RADIUS
  snmp        Change DSCP marking for SNMP
  snmp-trap   Change DSCP marking for SNMP-TRAP
  ssh         Change DSCP marking for SSH
  syslog      Change DSCP marking for SYSLOG
  telnet      Change DSCP marking for TELNET
  tftp        Change DSCP marking for TFTP
  5. Exit global configuration mode.
    device(config)# exit
  6. Save the configuration
    device# write memory
device# configure terminal
device(config)# ip self-generate-traffic ssh 802-1p-priority-marking 5
device(config)# ip self-generate-traffic ssh dscp-marking 45
device(config)# exit
device# write memory
Parent topic: Configuring QoS