Determining the Flash Image Version Running on the Device

The following example shows the flash image version running on a Compact device and provides the following version information.

• "SW: Version 09.0.10_b175T233" indicates the flash code version number.
• "labeled as TNR09010_b175" indicates the flash code image label. The label indicates the image type and version and is especially useful if you change the image file name.
• "from Primary TNR09010_b175.bin (UFI) SW: Version 09.0.10_b175T233" indicates the flash code image file name that was loaded.

ICX7650-48P Router> show version
  Copyright (c) Ruckus Networks, Inc. All rights reserved.
    UNIT 1: compiled on Jan 20 2022 at 08:04:05 labeled as TNR09010_b175
      (70999408 bytes) from Primary TNR09010_b175.bin (UFI)
        SW: Version 09.0.10_b175T233
      Compressed Primary Boot Code size = 1573376, Version:10.1.22T235 (tnu10122)
       Compiled on Wed Dec 13 11:14:03 2017

  HW: Stackable ICX7650-48-HPOE
==========================================================================
UNIT 1: SL 1: ICX7650-48P-L3-PREM POE 48-port Management Module
      Serial  #:EZD3350N037
      Software Package: ICX7650_BASE_L3_SOFT_PACKAGE
      Current License: l3-base
      P-ASIC  0: type B567, rev 11  Chip BCM56567_B0
==========================================================================
UNIT 1: SL 3: ICX7650-2X100G 2-port 200G Module
==========================================================================
 2000 MHz ARMv8 Cortex-A57 processor 88 MHz bus
    8 MB boot flash memory
    2 GB code flash memory
    4 GB DRAM
STACKID 1  system uptime is 95 day(s) 1 hour(s) 12 minute(s) 38 second(s)
The system started at 21:16:53 GMT+00 Thu Jan 20 2022

The system : started=cold start