Displaying Information About Management Ports

Management port information can be displayed using several command-line interface (CLI) command options.

Before entering the commands in this task, ensure that the management port is configured.

The steps in this task can be performed in any order.

To display the current management port configuration use the show running-config interface management command with a specified port number.
```
device> show running-config interface management 1

interface management 1
ip address 10.44.9.64 255.255.255.0
```

To display more detailed interface configuration information about the management port, use the show interfaces management command with a specified port number.

device(config)# show interfaces management 1

GigEthernetmgmt1 is up, line protocol is up
 Port up for 4 day(s) 1 hour(s) 43 minute(s) 8 second(s)
 Hardware is GigEthernet, address is 0000.0076.544a (bia 0000.0076.544a)
 Configured speed auto, actual 1Gbit, configured duplex fdx, actual fdx
 Configured mdi mode AUTO, actual none
(output truncated)

To display summary management interface information, enter the

show interfaces brief management

command with a specified port number.

device# show interfaces brief management 1

Port   Link  State  Dupl  Speed  Trunk  Tag  Pri  MAC             Name
mgmt1  Up    None   Full  1G     None   No   0    0000.0076.544a

To display management port statistics, enter the show statistics management command with a specified port number.

device# show statistics management 1

Port   Link  State  Dupl  Speed  Trunk  Tag  Pvid Pri  MAC             Name
mgmt1  Up    None   Full  1G     None   No   None 0    0000.0076.544a
 
Port mgmt1 Counters:
        InOctets      3210941          OutOctets   1540
          InPkts        39939         OutPackets     22
 InBroadcastPkts         4355   OutbroadcastPkts      0
  InMultiastPkts        35214   OutMulticastPkts      6
   InUnicastPkts          370     OutUnicastPkts     16
(output truncated)

To display summary management interface statistics, enter the show statistics brief management command with a specified port number.

device# show statistics brief management 1

Port In  Packets Out  Packets Trunk  In Errors  Out Errors
mgmt1    19040         5             0	         0
Total    19040         5             0	         0

Configuration Fundamentals

Displaying Information About Management Ports