Displaying Information for Breakout Ports
The show breakout command indicates
which ports are configured for breakout and which breakout ports are in operation.
The command
also displays ports that have been configured for breakout but that are not yet broken
out
into subports, pending reload.
The following example displays breakout port information.
device# show breakout Unit-Id: 1 Port Module Exist Module Conf breakout_conf breakout_oper 1/1/1 Yes No No No 1/1/2 Yes No No No 1/1/3 Yes No No No 1/1/4 Yes No No No 1/1/5 Yes No No No 1/1/6 Yes No No No 1/1/7 Yes No No No 1/1/8 Yes No No No 1/1/9 Yes No Yes Yes 1/1/10 Yes No No No 1/1/11 Yes No No No 1/1/12 Yes No No No 1/2/1 Yes No No No 1/2/2 Yes No No No 1/2/3 Yes No No No 1/2/4 Yes No No No 1/2/5 Yes No Yes Yes 1/2/6 Yes No No No 1/2/7 Yes No No No 1/2/8 Yes No No No 1/2/9 Yes No No No 1/2/10 Yes No No No 1/2/11 Yes No No No 1/2/12 Yes No No No 1/3/1 Yes No No No 1/3/2 Yes No No No 1/3/3 Yes No No No 1/3/4 Yes No No No 1/3/5 Yes No No No 1/3/6 Yes No No No 1/3/7 Yes No No No 1/3/8 Yes No No No