Find Technical Content
  • Home
  • Ruckus Support Portal
  • Ruckus Networks
  • Table of Contents
  • Dark Mode

Powered by Titania Delivery

⚠ This cached page may be outdated. Click refresh to get the latest content.
Cached Version You are Offline

You are viewing a cached version of this page.

You are currently offline. This page was loaded from cache.

IPv6 Addressing

  • 1 IPv6 Addressing
    • 1.1 IPv6 Addressing Overview
      • 1.1.1 IPv6 Address Types
      • 1.1.2 IPv6 Stateless Auto-Configuration
    • 1.2 Full Layer 3 IPv6 Feature Support
    • 1.3 IPv6 CLI Command Support
    • 1.4 IPv6 Host Address on a Layer 2 Switch
      • 1.4.1 Configuring a Global or Site-Local IPv6 Address with a Manually Configured Interface ID
      • 1.4.2 Configuring a link-local IPv6 address as a system-wide address for a switch
    • 1.5 Configuring the management port for an IPv6 automatic address configuration
    • 1.6 Configuring Basic IPv6 Connectivity on a Layer 3 Switch
      • 1.6.1 Enabling IPv6 routing
      • 1.6.2 IPv6 Configuration on Each Router Interface
        • 1.6.2.1 Configuring a Global or Site-Local IPv6 Address on an Interface
        • 1.6.2.2 Enabling IPv6 on an Interface
        • 1.6.2.3 Configuring a link-local IPv6 address on an Interface
        • 1.6.2.4 Configuring an IPv6 anycast address on an interface
      • 1.6.3 Dual Stacking for IPv4 and IPv6
    • 1.7 IPv6 Over IPv4 Tunnels
      • 1.7.1 IPv6 over IPv4 tunnel configuration notes
      • 1.7.2 Configuring a Manual IPv6 Over IPv4 Tunnel
      • 1.7.3 Clearing IPv6 Tunnel Statistics
      • 1.7.4 Displaying IPv6 tunnel information
    • 1.8 IPv6 Management
      • 1.8.1 Configuring IPv6 Management ACLs
      • 1.8.2 Restricting SNMP access to an IPv6 node
      • 1.8.3 Specifying an IPv6 SNMP trap receiver
      • 1.8.4 Configuring SNMP V3 Over IPv6
      • 1.8.5 Secure Shell, SCP, and IPv6
      • 1.8.6 IPv6 Telnet
        • 1.8.6.1 Establishing a Telnet Session from an IPv6 Host
      • 1.8.7 IPv6 traceroute
      • 1.8.8 IPv6 Web Management Using HTTP and HTTPS
      • 1.8.9 Restricting Web Management Access
      • 1.8.10 Configuring Name-to-IPv6 Address Resolution Using IPv6 DNS Resolver
      • 1.8.11 Defining an IPv6 DNS Entry
      • 1.8.12 Pinging an IPv6 address
      • 1.8.13 Configuring an IPv6 Syslog Server
      • 1.8.14 Viewing IPv6 SNMP server addresses
      • 1.8.15 Disabling router advertisement and solicitation messages
      • 1.8.16 Disabling IPv6 on a Layer 2 Switch
    • 1.9 IPv6 ICMP Feature Configuration
      • 1.9.1 Enabling IPv6 ICMP Redirects and Configuring ICMP Rate-Limiting
    • 1.10 IPv6 Neighbor Discovery Configuration
      • 1.10.1 IPv6 Neighbor Discovery Configuration Notes
      • 1.10.2 Neighbor Solicitation and Advertisement Messages
      • 1.10.3 Router advertisement and solicitation messages
      • 1.10.4 Neighbor redirect messages
      • 1.10.5 Duplicate Address Detection (DAD)
      • 1.10.6 IPv6 router advertisement parameters
      • 1.10.7 Prefixes Advertised in IPv6 Router Advertisement Messages
      • 1.10.8 Domain Name System Search List
        • 1.10.8.1 Configuring DNSSL
      • 1.10.9 Recursive DNS server addresses
        • 1.10.9.1 Configuring recursive DNS server addresses
      • 1.10.10 IPv6 address advertisement suppression
        • 1.10.10.1 Suppressing the advertisement of all configured IPv6 addresses
        • 1.10.10.2 Suppressing the advertisement of selected IPv6 addresses
      • 1.10.11 Flags in IPv6 Router Advertisement Messages
      • 1.10.12 Enabling and disabling IPv6 router advertisements
      • 1.10.13 IPv6 router advertisement preference support
        • 1.10.13.1 Configuring IPv6 RA Preference
      • 1.10.14 Configuring the Stale State Timeout for IPv6 Neighbors
      • 1.10.15 Configuring the Maximum Number of IPv6 Cache Entries
      • 1.10.16 Configuring the Maximum Number of IPv6 Neighbors
      • 1.10.17 Reachable time for remote IPv6 nodes
    • 1.11 IPv6 Neighbor Discovery Proxy
      • 1.11.1 IPv6 ND Proxy
      • 1.11.2 Local ND Proxy
      • 1.11.3 Configuring IPv6 ND Proxy Globally
      • 1.11.4 Configuring Local ND Proxy on an interface
      • 1.11.5 Disabling IPv6 ND Proxy
    • 1.12 IPv6 Neighbor Discovery Inspection
      • 1.12.1 Configuring Neighbor Discovery Inspection
      • 1.12.2 Configuring Neighbor Discovery Inspection on Multiple VLANs
      • 1.12.3 Syslog message for ND Inspection
    • 1.13 IPv6 MTU
      • 1.13.1 Configuration Notes and Feature Limitations for IPv6 MTU
      • 1.13.2 Changing the IPv6 MTU
    • 1.14 Configuring IPv6 Extension Header Option Type Filters
    • 1.15 127-Bit Subnet Masks on Point-to-Point Networks
      • 1.15.1 Assigning a 127-bit subnet mask to an IPv6 address
    • 1.16 Static Neighbor Entries Configuration
    • 1.17 Limiting the number of hops an IPv6 packet can traverse
    • 1.18 IPv6 source routing security enhancements
    • 1.19 TCAM Space Configuration
      • 1.19.1 Allocating TCAM Space
    • 1.20 Displaying IPv6 Global Information
    • 1.21 Displaying the IPv6 Local Router Information
    • 1.22 Clearing Global IPv6 Information

Configuring the management port for an IPv6 automatic address configuration

You can have the management port configured to automatically obtain an IPv6 address for your RUCKUS device. This process is the same for any other port and is described in detail in the section Configuring a Global or Site-Local IPv6 Address on an Interface.

Parent topic: IPv6 Addressing

Did you find what you were looking for?

Thanks!

Ruckus Wireless

© 2026 Ruckus Wireless LLC All rights reserved.

  • Accessibility
  • Privacy & Cookies
  • Do Not Sell My Information
  • Trademarks
  • Terms
  • Feedback