Configuring Neighbor Discovery Inspection

The ND inspection configuration task includes enabling ND inspection on a VLAN, adding static inspection entries, and enabling trust mode for switch or server ports. To configure neighbor discovery inspection, complete the following steps.
  1. Use the ipv6 neighbor inspection vlan command to enable ND inspection on a VLAN. 
    device(config)# ipv6 neighbor inspection vlan 10
  2. Use ipv6 neighbor inspection command to add a static ND inspection entry. You can add multiple static ND inspection entries. 
    device(config)# ipv6 neighbor inspection 2001::1 0000.1234.5678
  3. Use the interface ethernet command to enter the interface configuration mode. 
    device(config)# interface ethernet 1/1/1
  4. Use ipv6-neighbor inspection trust command to enable trust mode for the switch or server port. You can enable trust mode for multiple ports. 
    device(config-if-e1000-1/1/1)# ipv6-neighbor inspection trust
Parent topic: IPv6 Neighbor Discovery Inspection