Find Technical Content
  • Home
  • Ruckus Support Portal
  • Ruckus Networks
  • Table of Contents
  • Dark Mode

Powered by Titania Delivery

⚠ This cached page may be outdated. Click refresh to get the latest content.
Cached Version You are Offline

You are viewing a cached version of this page.

You are currently offline. This page was loaded from cache.

Rapid Spanning Tree Protocol

  • 1 Rapid Spanning Tree Protocol
    • 1.1 RSTP Overview
    • 1.2 RSTP Parameter Configuration
      • 1.2.1 RSTP Parameters and Defaults
      • 1.2.2 Configuring IEEE 802.1w Rapid Spanning Tree Protocol
        • 1.2.2.1 Note Regarding Pasting IEEE 802.1w Settings into the Running Configuration
      • 1.2.3 Displaying RSTP (IEEE 802.1w) Information
    • 1.3 Bridges and Bridge Port Roles
    • 1.4 Edge Ports and Edge Port Roles
    • 1.5 Point-to-Point Ports
    • 1.6 Bridge Port States
    • 1.7 Edge Port and Non-Edge Port States
    • 1.8 Changes to Port Roles and States
    • 1.9 IEEE 802.1w Convergence in a Simple Topology
    • 1.10 Convergence after a Link Failure
    • 1.11 Convergence at Link Restoration
    • 1.12 Convergence in a Complex IEEE 802.1w Topology
    • 1.13 Propagation of Topology Change
  • 2 PVST/PVST+ Compatibility
    • 2.1 Overview of PVST and PVST+
    • 2.2 Configuring PVST+ Support
      • 2.2.1 Enabling PVST+ Support Manually
    • 2.3 Displaying PVST+ Support Information
    • 2.4 PVST+ Configuration Examples
      • 2.4.1 Tagged Port Using Default VLAN 1 as its Port Native VLAN
      • 2.4.2 Untagged Port Using VLAN 2 as Port Native VLAN
    • 2.5 PVST+ Protect
  • 3 PVRST Compatibility
  • 4 BPDU Guard
    • 4.1 Enabling STP BPDU Guard
    • 4.2 Displaying the BPDU Guard Status
      • 4.2.1 BPDU Guard Status Example Configurations
    • 4.3 BPDU Guard Status Example Console Messages
  • 5 Root Guard
    • 5.1 Enabling STP Root Guard
    • 5.2 Displaying the STP Root Guard
  • 6 Designated Protection
    • 6.1 Enabling Designated Protection on a Port
    • 6.2 Syslog Message for a Port in Designated Inconsistent State
  • 7 Error Disable Recovery
    • 7.1 Enabling an Error-Disabled Port Automatically
    • 7.2 Enabling an Error-Disabled Port Manually
    • 7.3 Setting the Recovery Interval
    • 7.4 Displaying the Error Disable Recovery State by Interface
    • 7.5 Displaying the Recovery State for All Conditions
    • 7.6 Displaying the Recovery State by Port Number and Cause
    • 7.7 Errdisable Syslog Messages
  • 8 802.1s Multiple Spanning Tree Protocol
    • 8.1 Multiple Spanning Tree Regions
    • 8.2 Configuration Notes
    • 8.3 Configuring MSTP Mode and Scope
    • 8.4 Reduced Occurrences of MSTP Reconvergence
      • 8.4.1 Example Application of MSTP Reconvergence
      • 8.4.2 Deleting a VLAN to MSTI Mapping
      • 8.4.3 Viewing the MSTP Configuration Digest
    • 8.5 Configuring Multiple Spanning Tree Protocol
    • 8.6 MSTP+ Overview
    • 8.7 Configuring MSTP+
    • 8.8 Switching Between Non-MSTP, MSTP, and MSTP+ Modes
    • 8.9 Disabling MSTP on a Port
    • 8.10 Changing MSTP Port Parameters
    • 8.11 Forcing Ports to Transmit an MSTP BPDU
    • 8.12 Enabling MSTP on a Device
    • 8.13 Displaying MSTP Statistics
    • 8.14 Displaying MSTP Information for a Specified Instance
    • 8.15 Displaying MSTP Information for CIST Instance 0
    • 8.16 MSTP Root Guard
      • 8.16.1 Configuring MSTP Root Guard
      • 8.16.2 Displaying MSTP Root Guard Configuration
  • 9 Packet InError Detection
    • 9.1 Configuring Packet InError Detection
    • 9.2 Syslog Message for Error-Disabled Port Due to inError Packets

PVST+ Configuration Examples

The following sections show examples for two common configurations:

  • Tagged IEEE 802.1Q BPDUs on VLAN 1 and untagged BPDUs on another VLAN
  • Untagged IEEE 802.1Q BPDUs on VLAN 1 and tagged PVST+ BPDUs on other VLANs

In this section:

  1. Tagged Port Using Default VLAN 1 as its Port Native VLAN
  2. Untagged Port Using VLAN 2 as Port Native VLAN
Parent topic: PVST/PVST+ Compatibility

Did you find what you were looking for?

Thanks!

Ruckus Wireless

© 2026 Ruckus Wireless LLC All rights reserved.

  • Accessibility
  • Privacy & Cookies
  • Do Not Sell My Information
  • Trademarks
  • Terms
  • Feedback